Owner's Manual
Table Of Contents
- Owner's Manual
- IMPORTANT SAFETY INSTRUCTIONS
- Introduction
- Included items
- Conventions used in this manual
- Features
- Precautions for placement and use
- Using the TEAC Global Site
- Product registration
- Beware of condensation
- Cleaning the unit
- Notes about power supplies
- About TASCAM customer support service
- SD cards and USB flash drives
- Handling discs
- Names and functions of parts
- Home Screen
- Disc
- Media
- Settings
- Making connections
- Installing rackmount ears
- Display
- Preparing the remote control
- Turning the unit on and off
- Loading and removing discs
- Inserting and removing SD cards
- Connecting and disconnecting USB flash drives
- Panel lock functions
- Remote control overview
- BD-Live overview
- Types of media that can be played
- Playing media
- Automatic playback overview
- Playing video discs
- Pausing playback
- Stopping playback
- Searching backward/forward
- Skipping to earlier and later chapters and tracks
- Slow playback
- Repeating playback of part of a scene or a track
- Repeating playback of a chapter, title or track
- Jumping to a specific playback time, scene or track
- Playing files on USB flash drives, SD cards, data discs and network drives
- Playing USB flash drive, SD card and data disc playlists
- Using program playback
- Setting bookmarks
- Viewing photos
- Adjusting the volume from the unit
- Speaker settings
- Network connection overview
- Option menus
- Troubleshooting
- Specifications
- Dimensional drawings
- Notice regarding software that uses the GNU GPL
34 TASCAM BD-MP4K
Jumping to a specific playback time, scene
or track
(This also applies to “chapters” when using audio discs.)
During disc playback, press the SEARCH button to show an
information bar at the top of the monitor. A cursor will appear in
the time display area.
At this time, press a
l
/
;
cursor button to move the selection
between the time and chapter display areas.
NOTE
Only playback times and chapter numbers that exist on
the playing disc can be specified. Values that exceed these
ranges cannot be specified.
Jumping to a specific playback time
1. In this state, press the ENTER button to select the time
display area, enabling the value to be changed.
2. Use the number buttons to input values.
Use the
l
and
;
cursor buttons to move between the
hours, minutes and seconds.
(In the illustration below, values have been entered for
minutes and seconds.)
3. After inputting values, press the ENTER button to start
playback from the specified time.
(The chapter display will also change to the chapter at the
specified time.)
Time display
Hours: minutes: seconds
Chapter display
Press the ON SCREEN button to close the information bar.
Jumping to a specific chapter or track
1. Use a
l
or
;
cursor button in the time display area to move
the cursor to the chapter display area.
In this state, press the ENTER button to select the chapter
display area, enabling the value to be changed.
2. Use the number buttons to input values.
3. After inputting values, press the ENTER button to start
playback from the specified chapter.
(The time display will also change to the time at the
specified chapter.)
Press the ON SCREEN button to close the information bar.
Playing files on USB flash drives, SD
cards, data discs and network drives
1. Select Media on the Home Screen and press the ENTER
button.
2. Media icons will appear. Use the
j
and
k
cursor buttons
to select the icon with the file you want to play, and press
the ENTER button.
LOAD will appear on the display while the medium is
being loaded. The following will be shown when loading
completes.
i
USB flash drive: USB
i
SD card: SD
i
Network media: Network name
Opening the selected icon will show the following folders.
… : Top folder
Photo: Photo folder
Music: Music folder
Video: Video folder
AVCHD: High-quality video folder
3. Select the target folder, and press the ENTER button.
Files inside the folder will be shown.
(Example: Music folder open)
4. Use the
j
and
k
cursor buttons to select a file and press
the
7
button to start playback.
When a file is selected, the following information
appears on the right side of the monitor.
i
Thumbnails of image files
i
Various information for audio and video files