User's Manual

Table Of Contents
24 TASCAM BD-MP4K
Background opacity Solid/Translucent/Transparent
The opacity of the background of subtitle fonts can
be changed.
p Solid
p Translucent
p Transparent
Window color Default/White/Black/Red/Green/Blue/Yellow/Magenta/Cyan
The color of the subtitle window can be changed.
Window opacity Solid/Translucent/Transparent
The opacity of the subtitle window can be changed.
p Solid
p Translucent
p Transparent
Audio Settings
Audio Output
Function Options Explanation
S/PDIF Bitstream/PCM/Off This selects the digital audio signal format.
HDMI Bitstream/PCM/Off This selects the HDMI output audio format.
FS Setting 48 kHz/96 kHz/192 kHz
This selects the sampling frequency.*
Volume Control Enable/Disable
Volume up/down operations can be enabled or disabled.
Dolby DRC Off/On/Auto Dolby dynamic range control can be set to Off, On or Auto.
DRC Off/Mode 1/Mode 2 Dynamic range control can be set to Off, Mode 1 or Mode 2.
* The downsampling frequency used during audio playback for signal processing inside the unit can be set. If an audio signal is played that
has a sampling frequency higher than the selected value, it will be converted to the set sampling frequency. PCM output signals from the
HDMI and DIGITAL OUT connectors will also be downsampled to the set value.
Speaker Settings
Function Options Explanation
Configuration
2.x/3.x/4.x/5.x/6.x/7.x
The channel configuration can be selected, and the speaker size,
trim and delay settings can be set for each channel.
Press the
ENTER
button to change the settings of that speaker and its paired speaker.
p Size: Speaker size setting
o Large/Small
p Trim: Trim adjustment
o This can be adjusted in a range from
−10 dB
to
+10 dB
in
0.5dB increments.
1
p Delay: Delay adjustment
o 0 cm
1000 cm in 5cm intervals. (Delay time is 29μsec/cm.)
Channel configuration Subwoofer selection
2.x: Lt/Rt
2
, Stereo
None, Single
3.x: LCR
4.x: LRLsRs
5.x: -
6.x: -
7.x: C+LR+LsRs+LsrRsr
NOTE
For the subwoofer, only trim can be adjusted. The size cannot be
selected and the delay cannot be adjusted.