Owner's Manual

TASCAM CD-200SB
15
2 – Names and functions of parts
e OPEN/CLOSE button
Use to open and close the disc tray.
r MEDIA SELECT button
Set the current media to CD, SD card or USB flash drive.
Cycle through the current media options
NOTE
You cannot select SD or USB if the corresponding media type
is not loaded.
t TRK SEL button
Press to light the TRK SEL indicator on the main unit.
When the TRK SEL indicator on the main unit is not lit, the
FOLDER/TRACK SELECT (1–10/0) buttons can be used
for the direct folder playback function. (See “Direct folder
playback” on page 35.)
When the TRK SEL indicator on the main unit is lit, the
FOLDER/TRACK SELECT (1–10/0) buttons can be used as
number (1–10/0) buttons to select tracks on the current
media. (See “Selecting by track number” on page 23.)
y CANCEL button
When the CANCEL indicator on the main unit is lit or
blinking, you can press this button to cancel the previous
operation.
u DUBBING button
Use when dubbing (copying) from a CD to an SD card or USB
flash drive. (See “7 – Dubbing (copying)” on page 38.)
i ERASE FOLDER button
Press to activate the folder erase mode in which you can
erase folders on SD cards and USB flash drives. (See “Erasing
folders” on page 42.)
o WAV/MP3 button
Press when dubbing to change the recording format. (See
“Dubbing” on page 39.)
p PROGRAM EDIT button
Use to set, confirm and edit programs. (See “Programmed
playback” on page 24.)
a INTRO CHECK button
Use for intro check playback. The first 10 seconds at the
beginnings of tracks on the current media will be played
back one after another.
During intro check playback, press and hold this button
again to return to ordinary playback mode. (See “Intro Check
function” on page 29.)
s −/+ buttons
Use these adjust the pitch control value during CD playback.
(See “Pitch control (with CDs only)” on page 28.)
d STOP button
Press to stop playback.
While editing a program, press to clear all the program
entries. (See “Setting the program” on page 25.)
f BROWSE button
Press to activate browse mode, which allows you to explore
the folder structure of the current media. (See “5 – Browsing”
on page 30.)
g PLAY/PAUSE button
Press during playback to pause. When playback is stopped or
paused, press to start playback.
When in browse mode, use to confirm the selected track and
to start playback.