Owner's Manual

14
TASCAM CD-400U
2 – Names and Functions of Parts
a 8 [FM MODE] button
i
Press to input track number 8 when the current source is
CD, USB or SD and the play area is set to “ALL”. (see “Selecting
tracks directly” on page 25)
i
When the current source is AM or FM, press to tune in a pre-
set station.
i
When the current source is FM, and shift mode is active
(SHIFT indicator lit), press to switch between stereo and
mono for FM broadcast reception. (see “Setting the FM
mode” on page 32)
s 9 [P.AREA] button
i
Press to input track number 9 when the current source is
CD, USB or SD and the play area is set to “ALL”. (see “Selecting
tracks directly” on page 25)
i
When the current source is AM or FM, press to tune in a pre-
set station.
i
When the current source is USB or SD and shift mode is
active (SHIFT indicator lit), press to set the play area. (see
“Setting the playback area” on page 24)
d 0 [DUB] button and indicator
i
Press to input track number 0 when the current source is
CD, USB or SD and the play area is set to “ALL”. (see “Selecting
tracks directly” on page 25)
i
When the current source is AM or FM, press to tune in a pre-
set station.
i
When the current source is CD and playback is stopped or
the current source is AM/FM, press with shift mode active
(SHIFT indicator lit) to start dubbing (copying) preparation.
The indicator lights when the dubbing (copying) function
is active. (see “Dubbing procedures” on page 36)
f CLEAR button
i
When the current source is CD, USB or SD, press this to clear
values input with number buttons.
i
Press to close a warning message that has appeared on the
Home Screen.
i
When the current source is AM or FM, press and hold to clear
all preset stations for that source. (see “Clearing preset as-
signments” on page 33)
g SHIFT button and indicator
Press this button to light the indicator and enable shift mode,
which activates the shift functions of other buttons. (These
functions are shown below the buttons with white letters on
dark blue backgrounds.)
To deactivate the shift mode (SHIFT indicator unlit), press the
SHIFT button again.
h SOURCE button
Press to switch the current source. (see “Selecting the play-
back source” on page 22)
j DISPLAY button
i
Press during playback to show a variety of information. (see
“Time and text information display” on page 30)
i
Please ignore INFO on the remote control unit. (INFO func-
tion does not work on this unit.) This button does not work
at all on the USA/Canadian model.
k BACK [PAIRING] button
i
When the Menu screen is open, press to return to the Home
Screen.
i
When a Menu setting screen is open, press to go up one
menu level.
i
When the current source is USB or SD and the play area is
folder ( icon shown), press to move up one folder level.
(see “Playback area” on page 24)
i
When the current source is BLUETOOTH, press and hold to
activate Bluetooth pairing mode. When a Bluetooth con-
nection is active (Connected shown), press to disconnect
forcefully. (see “Pairing” on page 31)
l SD card slot
Insert SD cards in these slots. (see “Inserting and removing SD
cards” on page 21)
; USB port
Connect (and disconnect) USB flash drives here. (see “Con-
necting and disconnecting USB flash drives” on page 22)