Owner's Manual

18
TASCAM CD-400U
2 – Names and Functions of Parts
Menu structure
Press the main unit HOME/MENU button or remote control
MENU button to open the Menu screen.
The various menu items are as follows.
Menu item Function Page
APS Setting
Automatic power
saving function set-
ting
see page 38
DUB AutoMute
Dubbing automatic
muting function
setting
see page 37
A.Out Att.
Analog output
attenuation function
setting
see page 38
Resume Setting
Resume playback
function setting
see page 29
Inc Play
Incremental playback
function setting
see page 30
Serial Mode
(when sold-separately
Ethernet card installed)
Serial Mode setting
when Ethernet card
installed (sold-sepa-
rately)
see page 38
Baud Rate
RS-232C transmission
speed setting
see page 38
Tuner Out Sel
Tuner broadcast
sound output setting
see page 33
Information
Show information see page 39
Dubbing Format
Dubbing format
settings
see page 37
IR Remote Lock
Remote control lock
function setting
see page 22
Network Set.
(when sold-separately
Ethernet card installed)
Setting when Eth-
ernet card installed
(sold-separately)
FACTORY PRESET
Restore factory de-
fault settings
see page 39
NOTE
The settings for all menu items are retained even when the
unit is turned off.
Basic MENU screen operations
Operations are conducted on the Menu screen as follows.
Selecting items (moving vertically on a page):
Turn the MULTI-JOG dial on the main unit.
Use the
.
/
/
[
l
/
;
] buttons on the remote control.
Confirming a selected item:
Press the MULTI-JOG dial on the main unit.
Press the remote control ENTER button.
Opening a submenu from a page:
Press the MULTI-JOG dial on the main unit.
Press the remote control ENTER button.
Selecting an item in a submenu:
Turn the MULTI-JOG dial on the main unit.
Use the
.
/
/
[
l
/
;
] buttons on the remote control.
Going back one step in a menu:
Press the main unit BACK [PAIRING] button.
Press the remote control
k
button.
Returning directly to the Home Screen from a
menu screen:
Press the main unit HOME/MENU button.
Menu operation procedures
This example explains how to set the analog output attenuation
function.
1.
Press the main unit HOME/MENU button or remote control
MENU button to open the Menu screen.
Menu
< APS Setting >
APS Setting menu item shown
2.
Turn the main unit MULTI JOG dial or use the remote con-
trol
.
/
/
[
l
/
;
] buttons to select the setting item.
Menu
< A.Out Att. >
A.Out Att. selected
3.
Press the main unit MULTI JOG dial or remote control EN-
TER button to open the various setting screens.
A.Out Att.
< OFF >
A.Out Att. screen open
4.
Turn the main unit MULTI JOG dial or use the remote con-
trol
.
/
/
[
l
/
;
] buttons to change the setting.
5.
Press the main unit MULTI JOG dial or remote control EN-
TER button to confirm the setting and return to the Menu
screen.
6.
Repeat steps 2 to 5 as necessary to set each item.
7.
Press the main unit BACK [PAIRING] button or remote con-
trol
k
button to return to the Home Screen.