Owner's Manual

TASCAM CD-6010 33
7 – Other Functions
Interval time setting
The player can be set to wait for a specified time (interval
time) after completing playback of one track before
starting playback of the next track.
To make the interval time setting, use the 16 INTVAL
menu item.
1 Select the 16 INTVAL menu item.
2 Press the TRACK SKIP/DATA knob to enter interval
time setting mode. The screen appears as follows.
3 Turn the TRACK SKIP/DATA knob to set the interval
time, and press the TRACK SKIP/DATA knob to
confirm the setting.
Setting range: 0–5 minutes (10-second increments,
default value: 0 seconds)
NOTE
The interval time setting is retained even when the power is
turned off.
Outputting in mono
This player can output analog and digital signals in mono.
To make the player output in mono, set the 08 Mono
menu item to ON (default value: OFF ).
When mono output is on, MONO appears at the bottom of
the display.
NOTE
The mono output on/off setting is retained even when the
power is turned off.
Controlling the player with a
footswitch
You can connect a TASCAM RC-3F footswitch (sold
separately) to the REMOTE jack on the front panel and
use it to control the player.
TASCAM RC-3F
foot switch (sold separately)
Setting the footswitch
To set the footswitch, use the 18 REMOT menu item to
assign the functions to the switch controls (pedals).
Options: OFF , 1 (default value), 2 , 3 , 4
Using the footswitch
When you press the controls (pedals) on the footswitch,
they function according to the 18 REMOT setting.
Footswitch mode settings
The functions of the controls in each mode are as follows.
MODE
Footswitch controls
L (brief press) C (brief press) R (brief press)
L (long press) C (long press) R (long press)
1
Â
PLAY/PAUSE
¯
Ô
STOP

2
SKIP BACK PLAY/PAUSE CALL
Ô
STOP

3
PITCH (−) PLAY/PAUSE PITCH (+)
PITCH (−)
continuous
STOP PITCH (+)
continuous
4
PAUSE PLAY STOP
– – – – – – – – –