Operation Manual

24
TASCAM CD-9010CF
4 – Playback
Auto ready function
If the auto ready function is ON, when a track finishes playing,
playback standby will occur at the beginning of the next track.
1. Press the MENU button to open the
MENU
screen.
2. Open the
PLAY
menu screen.
3. Select
AUTO READY
.
3. Press the DATA dial to move the cursor right to select the
setting.
4. Turn the DATA dial to set the value to
ON
(default is
OFF
).
5. After setting the value, press the HOME button to return
to the Home Screen.
NOTE
If the auto cue function is set to ON, the unit enters playback
•
standby at the point where sound starts in the next track
rather than at the very beginning of the track.
The auto ready function setting is retained even when the
•
power is turned OFF.
Incremental playback function
When the incremental playback function is ON, and the unit is
playing back, you can use the PLAY button to start playback
from the beginning of the next track or the STOP button to
enter playback standby at the beginning of the next track.
1. Press the MENU button to open the
MENU
screen.
2. Open the
PLAY
menu screen.
3. Select
INCREMENTAL PLAY
.
4. Press the DATA dial to move the cursor right to select the
setting.
5. Turn the DATA dial to set the value to
ON
(default is
OFF
).
6. After setting the value, press the HOME button to return
to the Home Screen.
NOTE
When the incremental playback function is set to ON and
•
the unit is in playback standby mode, pressing the PLAY
button will start playback from that position. In playback
standby, pressing the STOP button will stop playback.
When the last track of the current device is being played,
•
pressing PLAY starts playback of the first track on the current
device media. Pressing STOP pauses at the beginning of the
first track on the current device.
The incremental playback function setting is retained even
•
when the power is turned OFF.