Operation Manual

TASCAM CD-9010CF
25
4 – Playback
ONLINE BACK CUE function
If this function is on, when the ON LINE button is turned OFF
on a connected TASCAM RC-9010/RC-9010S remote control
(sold separately), the unit immediately enters playback standby
at the last cue point (the last point where monitoring playback
started).
1. Press the MENU button to open the
MENU
screen.
2. Open the
PLAY
menu screen
3. Select
ONLINE BACK CUE
.
4. Press the DATA dial to move the cursor right to select the
setting.
5. Turn the DATA dial to set the value to
ON
(default is
OFF
).
6. After setting the value, press the HOME button to return
to the Home Screen.
NOTE
The ONLINE BACK CUE function setting is retained even when the
power is turned OFF.
PLAY KEY FUNCTION setting
When the ON LINE button is turned OFF on a connected
TASCAM RC-9010/RC-9010S remote control (sold separately), the
PLAY button operates as described below.
When set to
Normal
Pressing the PLAY button during playback has no effect. If
INCREMENTAL PLAY
is set to
ON
, however, pressing the PLAY
button during playback allows incremental playback.
When set to
Back Cue
If the incremental play function is OFF, pressing the PLAY
button skips to the last cue point and continues playback.
Pressing the PLAY button in this case activates monitoring
playback (monitoring outputs ON, line outputs OFF).
1. Press the MENU button to open the
MENU
screen.
2. Open the
PLAY
menu screen.
3. Select
PLAY KEY FUNCTION
.
4. Press the DATA dial to move the cursor right to select the
setting.
5. Turn the DATA dial to set the function when online
playback mode is OFF (default is
OFF
).
Values are
NORMAL
(default value) and
BACK CUE
.
6. After setting the value, press the HOME button to return
to the Home Screen.
NOTES
Similar operation is possible using the MONITOR button.
•
The PLAY KEY FUNCTION setting is retained even when the
•
power is turned OFF.