Operation Manual

32
TASCAM CD-9010CF
5 – Program and cue playback
7. Press the DATA dial to add the cue point. The current time
of the track being played back (or in standby) will be
added as a cue point to the cue list.
8. Repeat steps 5–7 to add cue points as desired.
The screen shows the track numbers and cue points.
9. When you are done adding cue point, press the HOME
button to return to the Home Screen.
NOTE
CUE settings are retained even when the power is OFF.
Clearing the cue list
1. Press the MENU button to open the
MENU
screen.
2. Open the
PROGRAM/CUE
menu screen and select
CUE LIST
EDIT
.
3. Press the DATA dial to open the
CUE
screen.
4. Turn the DATA dial to select
Cue List
.
5. Press the DATA dial to open the
CUE
menu.
6. Turn the DATA dial to select
DELETE ALL CUE
.
7. Press the DATA dial to clear all cue points in the cue list.
After the cue points have been cleared, the
CUE
list screen
reopens.
8. Press the HOME button to return to the Home Screen.
Clearing a cue point
1. Press the MENU button to open the
MENU
screen.
2. Open the
PROGRAM/CUE
menu screen and select
CUE LIST
EDIT
.
3. Press the DATA dial to open the CUE list screen.
4. Turn the DATA dial to select the cue point to be cleared
5. Press the DATA dial to open the
CUE
menu.
6. Turn the DATA dial to select
DELETE CUE
.
7. Press the DATA dial to clear the highlighted cue point.
After the cue point has been cleared, the
CUE
list screen
reopens.
8. Press the HOME button to return to the Home Screen.