Operation Manual

44
TASCAM CD-9010CF
8 – Other settings and information display
Setting the level meter display type
You can change the type of the playback level meters on the
Home Screen.
1. Press the MENU button to open the
MENU
screen.
2. Open the SYSTEM menu.
3. Select
METER TYPE
.
4. Press the DATA dial to move the cursor right to select the
setting.
5. Turn the DATA dial to set the type of level meters shown.
•
PEAK
: Peak meters shown
•
VU
(default value): VU meters shown.
6. After completing the setting, press the HOME button to
return to the Home Screen.
NOTE
The level meter type setting is retained even when the power is
turned OFF.
Fail safe function setting
The fail safe function prevents the accidental operation of
buttons. Different buttons are disabled during playback and
online playback. See the table below for details
1. Press the MENU button to open the
MENU
screen.
2. Open the
SYSTEM
menu.
3. Select
FAIL SAFE
.
4. Press the DATA dial to move the cursor (selected area)
right to select the setting.
5. Turn the DATA dial to set the fail safe function.
Options:
LOW LIM
(default value),
UP LIM
,
OFF
6. After completing the setting, press the HOME button to
return to the Home Screen.
NOTE
The fail safe setting is retained even when the power is turned
OFF.
Buttons disabled according to fail safe setting
Fail safe
setting
Disabled buttons
during playback
standby
Disabled buttons
during online
playback
LOW LIM
None
CD/CF button
ST/MONO button
BROWSE button
PLAY MODE button
MENU button
ENTER button
OPEN/CLOSE button
TRACK .//
buttons
SEARCH m/,
buttons
MONITOR button
UP LIM
CD/CF button CD/CF button
ST/MONO button ST/MONO button
BROWSE button BROWSE button
--- PLAY MODE button
MENU button MENU button
ENTER button ENTER button
OPEN/CLOSE button OPEN/CLOSE button
--- STANDBY button
TRACK .//
buttons
TRACK .//
buttons
SEARCH m/,
buttons
SEARCH m/,
buttons
--- MONITOR button
OFF
None None