Owner's Manual
Table Of Contents
- Owners Manual
- Table of Contents
- Supplied Accessories
- Parts & Controls
- What you can do with this unit
- Before use
- Discs
- Cassette tapes
- USB flash drives
- MP3 files
- Using the remote control
- Display
- Connections
- Basic operation
- Listening to a CD
- Repeat playback
- Shuffle playback
- Programmed playback
- Listening to a cassette tape
- Listening to files on a USB flash drive
- Recording on a USB flash drive
- Erasing files from a USB flash drive
- Recording on a cassette tape
- Timer-controlled playback and recording
- Automatic power saving function
- Troubleshooting
- MP3 playback order
- Maintenance
- Specs
21
This function can be used in CD and USB modes.
Up to 30tracks/files can be programmed in the desired order.
1
When playback is stopped, press the PROGRAM button
to enter program mode.
“PROGRAM” blinks and “P-01” appears on the display.
Example when in CD mode
< To stop programming, press the CD/USB Stop (H) button.
2
(When programming MP3 files)
Press the CD/USB FOLDER ( / ) buttons to select a
folder, then press the PROGRAM button.
< MP3 files not located in a specific folder are in the “001” (ROOT)
folder.
NOTE
The ROOT folder is the top-level folder.
Programmed playback
3
Press the CD/USB Skip (
.
or
/
) buttons to select a
track/file, then press the PROGRAM button.
The track/file is programmed, and “P-02” is displayed.
o Repeat steps
2
and
3
to program more tracks/files.
o You can program up to 30tracks/files.
o To stop programming, press the CD/USB Stop (H) button.
Programming is canceled, but the program contents are
retained in memory. If you want to restart program playback,
press the PROGRAM button, and then press the CD/USB Play
(t) button.
4
When the selection of track/file numbers is completed,
press the CD/USB Play (
t
) button to start program
playback.
To stop program playback, press the CD/USB Stop (H) button.
o After program playback finishes, press the PROGRAM button and
then the CD/USB Play (t) button to play the program again.
o You can use the CD/USB Skip (. and /) buttons during pro-
gram playback to select and play other tracks/files in the program.
o The shuffle function does not work during program playback.
o “REPEAT 1” and “REPEAT ALL” playback are possible during program
playback. When set to “REPEAT ALL” mode, the programmed tracks/
files will be played repeatedly.