Owner's Manual
Table Of Contents
- Owners Manual
- Table of Contents
- Supplied Accessories
- Parts & Controls
- What you can do with this unit
- Before use
- Discs
- Cassette tapes
- USB flash drives
- MP3 files
- Using the remote control
- Display
- Connections
- Basic operation
- Listening to a CD
- Repeat playback
- Shuffle playback
- Programmed playback
- Listening to a cassette tape
- Listening to files on a USB flash drive
- Recording on a USB flash drive
- Erasing files from a USB flash drive
- Recording on a cassette tape
- Timer-controlled playback and recording
- Automatic power saving function
- Troubleshooting
- MP3 playback order
- Maintenance
- Specs
33
6
Press the RECORD TAPE button again to start recording.
When recording from an external source, you must also start
playback of the source.
If the recording source is a CD or USB flash drive, that source will
automatically start playing back.
o Pressing either the TAPE Pause (9) or TAPE Play (t) button
will start recording.
The red indicator above the RECORD TAPE button and the
icon on the display stop blinking.
< To pause recording, press the TAPE Pause (J) button. Press the
button again to resume recording.
Pressing the RECORD TAPE or TAPE Play (t) button will also
resume recording. You can also resume recording by pressing
the source playback button if the recording source is a CD or USB
flash drive.
Recording from a CD or a USB flash drive
When source playback stops, recording also automatically stops.
To stop recording, press the TAPE Stop (H) button. Doing this
also stops playback of the recording source.
Recording from an external source
When source playback stops, recording does not automatically
stop. Press the TAPE Stop (H) button to stop recording.
Erasing recordings
When you make a recording, the tape is overwritten (the previous
recording is erased). You can erase a tape recording by setting the
recording level to MIN and recording silence.
1
Press the TAPE RECORD button to start recording
standby.
2
Set the REC LEVEL control to the minimum MIN position.
3
Press the TAPE RECORD button to start erasing (by
recording silence).