User's Manual

Design and specifications subject to change without notice.
© Tascam Division · TEAC Europe GmbH · All rights reserved.
Last update: 27/08/2004
Nominal level -10 dBV
Nominal impedance 50k ohm
Maximum level +6dBV
Outputs (analogue, unbalanced) RCA x 2
Nominal level -10 dBV
Nominal impedance 1k ohm
Maximum level +6dBV
Frequency response 50 Hz to 12.5 kHz (High Position)
50 Hz to 10 kHz (Normal)
Signal-to-Noise Ratio 46 dB (Dolby off)
52 dB (with Dolby-B)
Fast Winding Time 120 sec (approx.) with C-60 cassette
CD-R/RW Recorder
Applicable discs CD, CD-R, CD-RW, CD-R-DA, CD-RW-DA
Quantisation 16 bit
Sampling frequencies 44.1kHz
Inputs (analogue, unbalanced) RCA x 2
Nominal level -10dBV
Nominal impedance 50k ohm
Outputs (analogue, unbalanced) RCA x 2
Nominal level -10dBV
Nominal impedance 1k ohm
Inputs (digital, coaxial) RCA, IEC60958 Type II (SPDIF)
Sampling frequencies accepted 32kHz, 44.1kHz, 48kHz
Inputs (digital, optical) TOS LINK, IEC60958 Type II (SPDIF)
Sampling frequencies accepted 32kHz, 44.1kHz, 48kHz
Outputs (digital, coaxial) RCA, IEC60958 Type II (SPDIF)
Outputs (digital, optical) TOS LINK, IEC60958 Type II (SPDIF)
Frequency response 20Hz –20kHz, ±1dB (playback)
20Hz – 20kHz, +1dB, -1.5dB (recording)
Signal-to-noise ratio 92dB (playback), 88dB (recording)
Dynamic range 92dB (playback), 88dB (recording)
Total harmonic distortion <0.008% (playback)
<0.01% (recording)
Channel separation >80 dB (1kHz, playback)
>75 dB (1kHz, recording)
General
Headphones output 6.3-mm stereo phone jack
Output power 10mW x 2 (32ohm)
RIAA phono input RCA x 2
Nominal input voltage 5.6mV, 47k ohm
Signal-to-noise ratio 60dB
Voltage requirements 120 VAC / 230 VAC, 50-60 Hz
Power consumption 28W
Dimensions (W x H x D) 483mm x 138mm x 295mm
Weight 7.4kg
Page 2 of 2Tascam CC-222MKII
3/18/2005http://www.tascam.de/en/cc-222mkii.html