Owners Manual

4 − Playback operations
Track search
Normal search
Press the m/, search key continuously on the front panel,
or the SEARCH m/, key on the remote control.
To stop the search function, simply release the m/, or the
SEARCH key.
NOTE
The search function does not operate with MP3 discs.
Direct search
By specifying time from the start of a certain track, you can start
playback from a specied point of a specied track.
Basic operation
During stop, play or playback standby modes, use the number
keys on the remote control to input the three-digit track
number (such as 002 for track 2), then the desired elapsed time
(***min **sec) from the start of that track.
Example: To specify 1 min 30 sec from the start of track 2,
input “002 001 30”.
During input, the counter in the display will ash.
NOTE
Regardless of the time display mode. (see “Time display
switching” on page 20)
the time from the start of the specied track is displayed.
Pressing the CLEAR key cancels the input at any stage during
input.
During stop or playback modes, when the nal digit is entered,
the desired position is automatically located and playback will
begin from the desired point. During playback standby mode, at
the desired point the unit will enter playback standby mode.
NOTE
If a point which does not exist is entered, Direct Search time
entry mode will be cancelled.
The direct search function cannot be used in program or
random mode.
For MP3 discs, time cannot be specied within a track.
However, if you input the three-digit track number, playback
will begin from the start of that track.
Operation variations
Even if the nal “seconds” time value is not input, playback will
begin from the selected “minutes” time after pressing the ENTER
or PLAY key. Or, if you press the PAUSE key, the unit will enter the
playback standby mode at the selected point.
Specifying a track number only
After inputting the track number, press the ENTER or PLAY key
to begin playback of that track, or the PAUSE key to cue the track
and enter playback standby mode.
NOTE
Instead of inputting the three-digit track number, you can
input only the desired track number.
Example: To specify track 3, input only “3”.
Specifying to the minute
After inputting the three-digit track number and the number of
minutes after the start of the track, press the ENTER or PLAY key
to begin playback of that track, or the PAUSE key to cue the track
and enter playback standby mode.
Example: To specify 1 min 00 sec from the start of track 2,
input “002 001”
NOTE
Following the above example, if “0021” is input, the same
position will be located.
18 TASCAM CD-RW900SX