Operation Manual
Table Of Contents
- 1 – Introduction
- 2 – Names and Functions of Parts
- 3 – Preparation
- Installing an SSD/HDD drive in the case
- Loading and removing SSD/HDD cases
- Connecting and disconnecting USB flash drives
- Installing I/O cards (sold separately)
- Turning the unit on and off (putting it in standby)
- Setting the built-in clock date and time
- Adjusting the brightness
- Preparing SSD/HDD drives and USB flash drives for use
- Connecting headphones
- Setting the lock function
- 4 – Recording
- Restrictions on recording operations
- Setting the master clock
- Making word/video connector settings
- Setting the reference level
- Setting input monitoring
- Making recording channel settings
- Setting the recording file format
- Setting the file name format
- Automatically incrementing take numbers
- Incrementing take numbers manually
- Adding marks automatically when recording
- Adding marks manually when recording
- Setting the pause mode function
- Setting input signal routing
- Making I/O card settings
- Timecode synchronized recording
- Recording duration
- 5 – Working with Folders (BROWSE screen)
- Opening the BROWSE screen
- Navigating the BROWSE screen
- Icons on the BROWSE screen
- Folder operations
- Take and file operations
- Editing folder, take and file names
- Deleting folders, takes and files
- Copying folders, takes and files
- Rebuilding folders
- Editing the start timecode of a take
- Creating new folders
- Folder structure overview
- Folder structure
- File formats
- 6 – Playback
- 7 – Internal Settings
- 8 – Mark and Locate Functions
- 9 – Loading Files Recorded by Other Devices
- 10 – Data Transfer Using a Computer
- 11 – Other Settings, Information Screens and Keyboard Operations
- INFO button and indicator appearance
- Checking the firmware version
- Firmware update procedures
- Viewing media information
- Setting peak hold time
- Setting the meter mode
- Using a USB keyboard to operate the unit
- Setting the power redundancy check function (DA-6400dp only)
- Exporting/importing system backup data
- Restoring factory default settings
- 12 – Troubleshooting
- 13 – Specifications
- 14 – Important notice regarding software
TASCAM DA-6400/DA-6400dp
41
7 – Internal Settings
8
TIME ZONE
This shows the setting status of the Time Zone item on the
TIME ZONE
screen.
Select the
TIME ZONE
item, and press the MULTI JOG dial to
open the
TIME ZONE
screen.
Time Zone
item
Set the time offset from Coordinated Universal Time
(UTC).
Options:
-12:00
–
+14:00
(00:15/step, default:
+09:00)
NOTE
•
For the United States, use one of the following settings.
Zone Setting
Pacific Standard Time (PST) zone -08:00
Mountain Standard Time (MST)
zone
-07:00
Central Standard Time (CST) zone -06:00
Eastern Standard Time (EST) zone -05:00
•
To use Japan Standard Time (JST), set this to +09:00.
8
DST SETUP
This is the settings screen for the daylight savings time function,
which advances the built-in clock during the set period.
It shows the setting status of the
MODE
item on the
DAYLIGHT SAVING TIME
screen.
Select the
MODE
item, and press the MULTI JOG dial to open
the
MODE
screen.
When
MODE
is set to
Disable
When
MODE
is set to
Enable
MODE
item
Set whether or not to enable the daylight savings time
function.
Options
Disable
(default): Do not use the daylight savings
time function.
Enable
: Use the daylight savings time function.
START TIME/END TIME
items
Set when to start and end use of the daylight savings
time function.
Setting item Options
Month
Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep,
Oct, Nov, Dec
Week 1st, 2nd, 3rd, 4th, 5th, Last
Day Sun, Mon, Tue, Wed, Thu, Fri, Sat
Time 00:00 – 24:00 (01:00/step)
START TIME
defaults: Mar/2nd/Sun/02:00
END TIME
defaults: Nov 1st Sun 02:00
OFFSET TIME
item
Set the amount to advance the clock during daylight
savings time.
Options:
30min
,
60min
(default)
NOTE
On the screen, local time is set, not Coordinated Universal
Time (UTC).
When the
MODE
item is set to
Enable
, press the MULTI JOG
dial on
APPLY
in the last line to confirm the changed settings
and return to the Menu Screen.
NOTE
Press the EXIT [PEAK CLEAR] button to cancel the menu
operation and return to the Menu Screen.