Operation Manual
Table Of Contents
- 1 – Introduction
- 2 – Names and Functions of Parts
- 3 – Preparation
- Installing an SSD/HDD drive in the case
- Loading and removing SSD/HDD cases
- Connecting and disconnecting USB flash drives
- Installing I/O cards (sold separately)
- Turning the unit on and off (putting it in standby)
- Setting the built-in clock date and time
- Adjusting the brightness
- Preparing SSD/HDD drives and USB flash drives for use
- Connecting headphones
- Setting the lock function
- 4 – Recording
- Restrictions on recording operations
- Setting the master clock
- Making word/video connector settings
- Setting the reference level
- Setting input monitoring
- Making recording channel settings
- Setting the recording file format
- Setting the file name format
- Automatically incrementing take numbers
- Incrementing take numbers manually
- Adding marks automatically when recording
- Adding marks manually when recording
- Setting the pause mode function
- Setting input signal routing
- Making I/O card settings
- Timecode synchronized recording
- Recording duration
- 5 – Working with Folders (BROWSE screen)
- Opening the BROWSE screen
- Navigating the BROWSE screen
- Icons on the BROWSE screen
- Folder operations
- Take and file operations
- Editing folder, take and file names
- Deleting folders, takes and files
- Copying folders, takes and files
- Rebuilding folders
- Editing the start timecode of a take
- Creating new folders
- Folder structure overview
- Folder structure
- File formats
- 6 – Playback
- 7 – Internal Settings
- 8 – Mark and Locate Functions
- 9 – Loading Files Recorded by Other Devices
- 10 – Data Transfer Using a Computer
- 11 – Other Settings, Information Screens and Keyboard Operations
- INFO button and indicator appearance
- Checking the firmware version
- Firmware update procedures
- Viewing media information
- Setting peak hold time
- Setting the meter mode
- Using a USB keyboard to operate the unit
- Setting the power redundancy check function (DA-6400dp only)
- Exporting/importing system backup data
- Restoring factory default settings
- 12 – Troubleshooting
- 13 – Specifications
- 14 – Important notice regarding software
46
TASCAM DA-6400/DA-6400dp
8 – Mark and Locate Functions
Editing mark names
1. Select the mark with the name that you want to edit and
press the MULTI JOG dial to open the mark pop-up menu.
2. Select the
EDIT NAME
item in the mark menu, and press
the MULTI JOG dial to open the
MARK NAME
screen.
3. Input the mark name.
For details about how to edit the mark name, see “Editing
text” on page 26.
NOTE
•
The names of marks created by the automatic mark
function cannot be changed.
•
Editing the names of marks is only possible when stopped or
in playback standby.
Deleting marks
1. Select the mark that you want to delete and press the MULTI
JOG dial to open the mark pop-up menu.
2. Select the
DELETE
item in the mark menu, and press the
MULTI JOG dial.
3. A confirmation pop-up message will appear.
Press the MULTI JOG dial again to open a second confir-
mation pop-up message.
4. Press and hold the MULTI JOG dial to delete the selected
mark.
NOTE
Deleting marks is only possible when stopped or in playback
standby.
Deleting all marks in the current take
1. Press the MULTI JOG dial to open the mark pop-up menu.
2. Select the
DELETE ALL
item in the mark menu, and
press the MULTI JOG dial.
3. A confirmation pop-up message will appear.
Press the MULTI JOG dial again to open a second confir-
mation pop-up message.
4. Press and hold the MULTI JOG dial to delete all marks in the
current take.
NOTE
Deleting marks is only possible when stopped or in playback
standby.
Editing mark locations
You can edit the position (time) of a mark added using the
MULTI JOG dial (a mark named “MARK xx”).
NOTE
•
The names of marks created by the automatic mark
function cannot be changed.
•
Editing the locations of marks is only possible when stopped
or in playback standby.
1. Select the mark with the location that you want to edit and
press the MULTI JOG dial to open the mark pop-up menu.
2. Select the
EDIT TIME
item in the mark menu, and press
the MULTI JOG dial.
3. When the
EDIT MARK TIME
screen opens, use the
MULTI JOG dial to change the time.
Press the MULTI JOG dial when the cursor is in the last field
to confirm the setting and return to the
MARK INFO
screen.
NOTE
•
When editing, you can press the EXIT [PEAK CLEAR] button
to cancel the changes and return to the
MARK INFO
screen.
•
You can also use a USB keyboard to input numbers.
Viewing mark information
Press the MULTI JOG dial to open the mark pop-up menu, select
the
INFO
item and press the MULTI JOG dial again to show the
numbers of marks of different types in the current take.
Press the EXIT [PEAK CLEAR] button to close the pop-up
message.