Operation Manual
Table Of Contents
- 1 – Introduction
- 2 – Names and Functions of Parts
- 3 – Preparation
- Installing an SSD/HDD drive in the case
- Loading and removing SSD/HDD cases
- Connecting and disconnecting USB flash drives
- Installing I/O cards (sold separately)
- Turning the unit on and off (putting it in standby)
- Setting the built-in clock date and time
- Adjusting the brightness
- Preparing SSD/HDD drives and USB flash drives for use
- Connecting headphones
- Setting the lock function
- 4 – Recording
- Restrictions on recording operations
- Setting the master clock
- Making word/video connector settings
- Setting the reference level
- Setting input monitoring
- Making recording channel settings
- Setting the recording file format
- Setting the file name format
- Automatically incrementing take numbers
- Incrementing take numbers manually
- Adding marks automatically when recording
- Adding marks manually when recording
- Setting the pause mode function
- Setting input signal routing
- Making I/O card settings
- Timecode synchronized recording
- Recording duration
- 5 – Working with Folders (BROWSE screen)
- Opening the BROWSE screen
- Navigating the BROWSE screen
- Icons on the BROWSE screen
- Folder operations
- Take and file operations
- Editing folder, take and file names
- Deleting folders, takes and files
- Copying folders, takes and files
- Rebuilding folders
- Editing the start timecode of a take
- Creating new folders
- Folder structure overview
- Folder structure
- File formats
- 6 – Playback
- 7 – Internal Settings
- 8 – Mark and Locate Functions
- 9 – Loading Files Recorded by Other Devices
- 10 – Data Transfer Using a Computer
- 11 – Other Settings, Information Screens and Keyboard Operations
- INFO button and indicator appearance
- Checking the firmware version
- Firmware update procedures
- Viewing media information
- Setting peak hold time
- Setting the meter mode
- Using a USB keyboard to operate the unit
- Setting the power redundancy check function (DA-6400dp only)
- Exporting/importing system backup data
- Restoring factory default settings
- 12 – Troubleshooting
- 13 – Specifications
- 14 – Important notice regarding software
56
TASCAM DA-6400/DA-6400dp
11 – Other Settings, Information Screens and Keyboard Operations
•
The following setting items are saved and loaded with
system backup data.
Screen name Page name Setting item
Home Screen
Time counter
display mode
Solo selection
channel
LOCK
SETUP
screen
All settings
MENU screen
GENERAL
page
CLOCK
MASTER
WORD/VIDEO
SETUP
REFERENCE
LEVEL
INPUT
MONITOR
REC FILE FORMAT
page
All settings
REC OPTIONS
page All settings
PLAY SETUP
page All settings
INPUT ROUTING 1
page
All settings
INPUT ROUTING 2
page
All settings
SLOT 1
page All settings
SLOT 2
page All settings
TC SETUP 1
page All settings
TC SETUP 2
page All settings
PARALLEL INPUT
page
All settings
PARALLEL OUTPUT
page
All settings
NETWORK
page
IP SETUP
DNS SETUP
PASSWORD
SNTP
page
SNTP
UPDATE
NTP SERVER
UPDATE
TIME
TIME ZONE
DST SETUP
PREFERENCES
page All settings
Others
Color display
brightness
setting
Indicator
brightness
setting
Restoring factory default settings
You can restore the various settings stored in the backup
memory of the unit to their factory default values.
Use the following menu procedures to do so.
1. On the
SYSTEM SETUP
page, select the
FACTORY
PRESET
item. (See “Menu operation procedures” on page
16.)
2. Press the MULTI JOG dial.
A confirmation pop-up message will appear.
NOTE
Press the EXIT [PEAK CLEAR] button to cancel.
3. Press the MULTI JOG dial again.
A confirmation pop-up message will appear again.
When the confirmation pop-up is open, press and hold the
MULTI JOG dial to open a
Loading File...
pop-up
and restore the unit to its factory defaults.
After it completes, the Menu Screen will reopen.