Manual

8 – Remote operation : Selecting devices for transport control
108 TASCAM DM-4800 User’s Manual
When the scan is complete, a pop-up screen appears,
showing the detected devices and their assignments
to the control maps.
Any selected devices that may be controlled are
detected and a new map is created for each such
device.
A message is shown if there are more devices con-
nected than can be added to the list (that is, more
than 10).
If there are IDs associated with the devices, these are
also shown.
To use a transport mapping
Of course, at least one transport mapping must exist
before this operation can be carried out.
1 Press and hold down the
MACHINE SEL (F7)
key.
2 Press the numeric key corresponding to the
map you want to use (
0 through 9).
The DM-4800’s transport control keys will now con-
trol the device selected in that map and the other
mapping features will also be enabled. A popup
shows the currently-recalled memory (or a message
if no mapping has been recalled).
The
MAP field at the lower part of the screen shows
the currently-loaded map.
Viewing the transport mappings
To view the transport mappings (that is, the list of the
devices that will be controlled in each mapping):
1 Press and hold SHIFT and press the LOCATE
LIST (F8) key. The device controlled in each
map, together with its ID, is shown.
2 Press the
ENTER key to continue operations.
Editing a mapping
When a mapping has been made, parameters other
than the transport control may be edited (for
instance, the use of the
REC keys).
To make these changes a permanent part of the cur-
rently-loaded map:
1 Move the cursor to the number by the
MAP
field.
2 Use the wheel to select the mapping memory
into which the current mapping will be stored.
Press
ENTER.
3 Press
ENTER (the on-screen STORE button).