Manual

8 – Remote operation : Machine control setup
110 TASCAM DM-4800 User’s Manual
Record Command Type
Use this option to make the record commands from
the DM-4800’s MIDI Machine Control compatible
with the unit being controlled.
There are two options: True (40h) and Masked (41h) .
Consult the documentation of your other equipment
for details of compatibility.
Locate Preroll
Move the cursor to the numeric field, which shows
the pre-roll time when a location point is reached
(displayed in minutes and seconds). For example, if
this field shows
0:10 , if a location operation is carried
out to a location memory of 00:20:32, the actual
point located to is 00:20:22.
Note that this is used only in the case of Direct loca-
tion (“Location to a location memory” on page 116),
and not in the case of manual location operations
(“Manual location” on page 116), which locates to
the value entered, irrespective of the pre-roll time set
here.
Use the wheel to set the pre-roll value and confirm
the setting of this value with the
ENTER key.