Manual

9 – Specifications : Messages and troubleshooting
TASCAM DM-4800 User’s Manual 135
✖
The current project is protected.
Press ENTER to continue.
Trying to overwrite a protected project.
✔
The current project is changed.
Store current project?
ENTER key : Store and Create
CURSOR key : Create
Changes have been made to the current project before a project creation.
✔
The current project is not on the CF card.
Store the current project?\
Cannot copy
automation data and library data.
ENTER key : Store and Shut down
CURSOR key : Shut down
An attempts has been made to shut down the DM-4800 with no project stored on the
card.
✔
The current project
is not on the CF card.
Store the current project?
Cannot copy
automation data and library data
ENTER key : Store and Create
CURSOR key : Create
Confirmation that the current project should be stored on the card (it is not already
there). Automation and library data will not be stored.
✔
The format of this CF card
is unsupported.
Format CF card ?
Press ENTER to confirm,
or a cursor key to cancel.
An unrecognized CF card has been inserted – this message suggests reformatting the
card in DM-4800 format.
✔
The last stored project
cannot be found.
Create project?
Press ENTER to confirm,
or a cursor key to cancel.
At power-on, the last stored project cannot be found (maybe the card has been
changed).
✖
The project name is not inputted.
Press ENTER to continue.
An attempt has been made to create a project without giving it a name.
●
The project reload was completed.
A project has been successfully reloaded.
✖
There is no project loaded.
When storing, no project is currently loaded, so the data can’t be stored.
✖
This name is already assigned.
The name of the newly-created project already exists on the card as a project name.
✖
This project is protected.
The project to be renamed is protected.
✖
This project is the current project
Can’t change.
The current project cannot be renamed.
✖
Timecode running!
An attempt has been made to create a project, etc. while timecode is still running. Stop
the timecode and try again.
✖
Turn cascade off ?
Press ENTER to confirm,
or a cursor key to cancel.
Confirmation that the cascade is to be turned off.
✖
Turn cascade on ?
Press ENTER to confirm,
or a cursor key to cancel.
Confirmation that the cascade is to be turned on.
●
Turn off power now.
Press ALT + STOP + PLAY to reboot.
The shutdown process is now complete, and the power can be turned off, or the DM-
4800 can be rebooted.
Action Message Meaning
Table 9.1: Popup messages (continued)