Manual

5 – Channel modules : Global module settings
74 TASCAM DM-4800 User’s Manual
selected by moving the cursor to METERING POINT , and
using the wheel and
ENTER to set the point).
Buss and aux levels are selectable in groups of 4, and
the levels can be adjusted as with the channels using
the POD encoders.
The
SETUP section of the screen allows setting of the
first, second or third groups of eight buss levels, the
aux levels, or all aux and all buss levels, in the same
way as for the channel modules; using POD 3 to set
the level, and POD 4 to select the target, with the
ENTER key used to confirm the setting.
Figure 5.5: Master fader screen