Owner's Manual

DP-24
Owner's Manual addenda
2
TASCAM DP-24
Printed in China
Checking the noise shaper (noise
shaped dithering)
In firmware V1.10, the noise shaper function used when
mastering has been changed. Instead of it being reflected in
master files, you can now check in advance the effect that using
the noise shaper will have when creating an audio CD (see “Using
the noise shaper (Noise Shaped Dithering)” in 10 - Mixing Down
and Mastering Tracks of the Owner’s Manual).
1. When the Mastering screen is displayed, press the F3
( NSD ) button to open the NOISE SHAPED DITHERING
screen.
2. Press the F4 (ON/OFF) button to set the noise shaper
function to ON .
3. Press the F1 (g) button to return to the Mastering
screen.
NOTE
Even when the noise shaper on the Mastering screen is ON , it
will not be reflected in master files. Furthermore, even when the
noise shaper is ON , it will have no effect on 16-bit songs.
Using the noise shaper (noise shaped
dithering)
In firmware V1.10, a noise shipper button has been added to
the MASTER WRITE and LIVE WRITER screens. You can
use the noise shaper when creating an audio CD from master
files made from 24-bit songs. To use the noise shaper, select
the MASTER WRITE item from the CD menu to open the
MASTER WRITE screen and press the F3 ( NSD ) button.
NOTE
The noise shaper will be applied to all the songs written to the
CD. It will have no effect, however, on 16-bit songs. Furthermore,
the effect of the noise shaper will only be reflected on the audio
CD. It will not be reflected by master files.