User's Manual
Table Of Contents
- 1 – Introduction
- 2 - Quick Guide
- Playback and mixing
- Recording and mastering
- Creating a new song
- Connecting and setting the input sources
- Setting the guitar as the recording source for TRACK 1
- Adjusting and monitoring the input level
- Recording a guitar to TRACK 1
- Playing back the recording
- Recording a guitar to TRACK 2
- Recording a vocal to TRACK 3
- Mixing the tracks
- Mastering a recording
- Shutting down
- 3 – Names and Functions of Parts
- 4 – Preparation
- 5 - Song Management
- 6 - Basic Recording
- 7 - Recorder Functions
- 8 - Track Editing
- 9 - Using Built-In Effects
- 10 - Mixing Down and Mastering Tracks
- 11 - Various Other Functions
- 12 - SD Card Management
- 13 - Exchanging Data with a Computer
- 14 – Troubleshooting
- 15 – Messages
- 16 – Specifications
32
TASCAM DP-24SD
5 - Song Management
Viewing song information
You can check the song file format, song name (title), time/date,
and song size.
1. Press the MENU button to open the
MENU
screen.
2. Use the JOG/DATA dial or the CURSOR (5/b/g/t)
buttons to select (green highlight)
SONG
, and then press
the F4 (t) button.
The
SONG LIST
screen appears.
3. Press the F3 (
INFO
) button to show a song information
which appears in the following order:
SIZE
,
SAMPLE
RATE
,
SAMPLE BIT
, and
DATE
.
Copying songs
You can copy songs.
1. When the recorder is stopped, press the MENU button to
open the
MENU
screen.
2. Use the JOG/DATA dial or the CURSOR (5/b/g/t)
buttons to select (green highlight)
SONG
, and then press
the F4 (t) button.
The
SONG LIST
screen appears.
3. Select (blue highlight) a song you want to copy.
4. Next, press the F4 (t) button to open the corresponding
sub-menu. Use the JOG/DATA dial or the CURSOR (5/b)
buttons to select the item
COPY
from the sub-menu, and
then press the F4 (t) button.
A pop-up message appears asking you to confirm the copy.
5. Change the song name as you want and press the F2 (
YES
)
button.
NOTE
To cancel the song copy operation, press the F1 (
NO
) button
instead of the F2 (
YES
) button.
6. When the song copy operation is completed, the pop-up
window disappears and the display returns to the
SONG
LIST
screen.
Erasing songs
You can erase songs. You can also erase multiple songs at once.
You might want to erase unneeded songs if the SD card starts to
run out of space.
1. When the recorder is stopped, press the MENU button to
open the
MENU
screen.
2. Use the JOG/DATA dial or the CURSOR (5/b/g/t)
buttons to select (green highlight)
SONG
, and then press
the F4 (t) button.
The
SONG LIST
screen appears.
3. Select (blue highlight) the song you want to erase and then
press the F2 (4) button. To erase multiple songs, select all
songs you want to erase.
NOTE
To remove the check mark 4 from a check box, press the F2
(4) button again while the song is selected (blue highlight).
4. Next, press the F4 (t) button to open the corresponding
sub-menu. Use the JOG/DATA dial or the CURSOR (5/b)
buttons to select the item
ERASE
from the sub-menu, and
then press the F4 (t) button.
A pop-up message appears asking you to confirm the erase.
5. Press the F2 (
YES
) button to perform the erase.
NOTE
To cancel the song erase operation, press the F1 (
NO
) button
instead of the F2 (
YES
) button.
6. When the song erase operation is completed, the pop-up
window disappears and the display returns to the
SONG
LIST
screen.
NOTE
The MUSIC folder must always have at least one song stored.
Therefore, one song will be automatically created when you
insert or format a card.