User's Manual
Table Of Contents
- 1 – Introduction
- 2 - Quick Guide
- Playback and mixing
- Recording and mastering
- Creating a new song
- Connecting and setting the input sources
- Setting the guitar as the recording source for TRACK 1
- Adjusting and monitoring the input level
- Recording a guitar to TRACK 1
- Playing back the recording
- Recording a guitar to TRACK 2
- Recording a vocal to TRACK 3
- Mixing the tracks
- Mastering a recording
- Shutting down
- 3 – Names and Functions of Parts
- 4 – Preparation
- 5 - Song Management
- 6 - Basic Recording
- 7 - Recorder Functions
- 8 - Track Editing
- 9 - Using Built-In Effects
- 10 - Mixing Down and Mastering Tracks
- 11 - Various Other Functions
- 12 - SD Card Management
- 13 - Exchanging Data with a Computer
- 14 – Troubleshooting
- 15 – Messages
- 16 – Specifications
50
TASCAM DP-24SD
8 - Track Editing
8
IN/OUT/TO
To set the IN/OUT/TO points again, exit the TRACK EDIT screen,
and set them again from the beginning.
8
TARGET Track
This is the target editing track. In the case of OPEN, CUT, SILENCE,
and CLEAN OUT, it becomes the target track itself.
The choices depend on what you have already chosen for the
SOURCE Track
.
When a single track is specified as the
SOURCE Track
, the
TARGET Track
options are
1
to
12
(single tracks).
When a stereo track (e.g.
13/14
) is specified as the
SOURCE
Track
, the
TARGET Track
options are
13/14
to
23/24
(stereo track).
• You can also use the SELECT buttons of the tracks.
When
ALL
(all tracks) is specified as the
SOURCE Track
, the
TARGET Track
option is
ALL
(all tracks) only.
8
TIMES
Set the number of times that the copied section will be pasted.
Set the number between
1
and
99
.
COPY/PASTE
IN OUT TO
IN OUT TO
This function copies the audio data from between the IN and
OUT points on the COPY source track, and pastes it on the COPY
destination track starting from the TO point. This operation does
not change the COPY source track.
This operation overwrites recorded data on the COPY desti-
nation track. Therefore, the length of the COPY destination track
is not changed.
You can make multiple copies in a single operation.
In other words, you can overwrite the COPY destination track
from the TO point with a designated number of repetitions of
the COPY data.
The following parameters are used in this operation.
• SOURCE Track (
1
to
12
,
13/14
to
23/24
,
ALL
)
• IN/OUT/TO
• TARGET Track
• TIMES
COPY/INSERT
IN OUT TO
IN OUT TO
This function copies the audio data from between the IN and
OUT points on the COPY source track, and inserts it on the COPY
destination track starting from the TO point. This operation does
not change the COPY source track.
This operation inserts recorded data into the COPY destination
track. The recorded data on the COPY destination track after the
TO point is offset by the amount of time used by the inserted
audio data. Therefore, the COPY destination track becomes
longer.
You can make multiple copies in a single operation. In other
words, you can insert a designated number of repetitions of the
COPY data into the COPY destination track from the TO point.
The following parameters are used in this operation.
• SOURCE Track (
1
to
12
,
13/14
to
23/24
,
ALL
)
• IN/OUT/TO
• TARGET Track
• TIMES