Owner's Manual

TASCAM DR-05 23
t MARK button
When recording, use it to add markers
manually.
Press the  or ¯ button while pressing
and holding this button to move to the
previous or next mark, respectively.
When the Playback Control screen is open,
use this button to set the IN (start) and OUT
(end) points of the interval that you want to
set for loop playback. When the IN and OUT
points are already set, press this button to
cancel loop playback and clear the IN and
OUT points.
Front panel
y Strap attachment
Use this to attach a strap.
Rear panel
u MIC/EXT IN jack
Use this input jack to connect a stereo mini-jack
microphone or an external input device. This jack
provides plug-in power when set to do so on the
Input Setting Screen.
The built-in microphone is disabled if an external
microphone is connected to the MIC/EXT IN jack.
2–Names and Functions of Parts