Owner's Manual

TASCAM DR-05 29
3 Prerecording function status
PRE appears when the prerecording function
is
ON .
4 Low cut filter status
: Low cut filter off
: Low cut filter on (when set to 40Hz,
80Hz, or 120Hz)
5 Recorder operation status
ª Recording standby
π Recording paused (Recording standby)
º Recording
6
Recording level meters
The level of the input or playback sounds is shown.
When Monitor Mix is ON, the level of the combined
input and playback sounds is shown.
A ¶ mark is given at the -12dB position on the
scale as a guide mark for input level adjustment.
7 File name
The file name that will automatically be given
to recorded files is shown.
8
Recording mode
Recording file format, sampling frequency, and
stereo/mono (ST/MONO) status are shown.
9
Elapsed recording time
The elapsed recording time of the track
appears as hours: minutes: seconds.
0
Remaining recording time
The remaining recording time appears in
hours: minutes: seconds.
q Peak value in decibels (dB)
Peak recording level values are shown
digitally.
w
Input level display button
The  and ¯ buttons are shown on
the display to indicate that the input level
can be changed using these buttons.
Press the button (Â or ¯) to display the
pull-up window that shows the input level at
this position.
2–Names and Functions of Parts