Manualshelf

Reference Guide

ManualsBrandsTascam ManualsPortable Digital RecordersDR-05X 2-Input / 2-Track Portable Audio Recorder with Onboard Stereo Microphone
21222324252627282930
30
TASCAM DR-05X
4 – Recording
Using tone output
The tone output function can be used to automatically insert
a tone signal whenever recording starts and stops.
By connecting the /LINE OUT jack on the left side of the
unit and the external mic input jack of a digital SLR camera
and using the auto tone function, the same tone signal will
be recorded to files on both units. These tones can be used
as guides when synchronizing the files in video editing
software.
External mic input jack
Digital SLR camera
Connection example
Setting the AUTO TONE
1.
Press the MENU button to open the MENU screen.
2.
Use the + or – button to select (highlight) the REC
SETTING menu item, and press the 7 button.
The REC SETTING screen opens.
3.
Use the + or – button to select (highlight) the AUTO TONE
item, and press the / or 7 button.
4.
Use the + or – buttons to set when tone signals are
inserted.
Options: OFF (default), HEAD (recording start only),
HEAD+TAIL (recording start and stop)
5.
After completing the setting, press the ¤ (HOME)[8]
button to return to the Home Screen.
CAUTION
i
When recording is stopped by the AUTO REC function, no
tone signal will be recorded when it stops.
i
During overwrite recording, the automatic tone function
cannot be used.
Setting the AUTO TONE length
You can set the length of the AUTO TONE.
1.
Press the MENU button to open the MENU screen.
2.
Use the + or – button to select (highlight) the REC
SETTING menu item, and press the 7 button.
The REC SETTING screen opens.
3.
Use the + or – button to select (highlight) the TONE SECS
item, and press the / or 7 button.
4.
Use the + or – buttons to set the tone length.
Options: 0.5sec, 1sec (default), 2sec, 3sec
5.
After completing the setting, press the ¤ (HOME) [8]
button to return to the Home Screen.
Adjusting the AUTO TONE volume
You can adjust the volume of the AUTO TONE.
1.
Press the MENU button to open the MENU screen.
2.
Use the + or – button to select (highlight) the REC
SETTING menu item, and press the 7 button.
The REC SETTING screen opens.
3.
Use the + or – button to select (highlight) the TONE VOL
item, and press the / or 7 button.
4.
Use the + or – buttons to adjust the tone volume.
Options: -12dB, -18dB(default), -24dB, -30dB, -36dB
5.
After completing the setting, press the ¤ (HOME) [8]
button to return to the Home Screen.