User Manual

TASCAM DR-10SG
13
NOTE
• Without pausing recording, a new file can be
created automatically during recording when
the file size reaches 2 GB. (Track incrementing)
• Using the REC indicator (green) on the unit as
a guide, set the mic gain with the Menu Screen
1:MIC GAIN item (or the .// buttons
when recording). (See “Menu structure” on
page 14.)
• Press the RECORD button during recording to
switch between showing the elapsed recording
time and the remaining recording capacity of
the microSD card.
CAUTION
When 04:AUTO LEVEL is set to ON , the mic
gain setting cannot be changed using the
.// buttons during recording.
Pressing these buttons during recording will
cause a NO-AUTOLVL ON! pop-up message
to appear.
Playback and searching
backward/forward
The Home Screen shown below appears after the
unit starts up.
8
Starting and stopping playback
When the Home Screen is open and playback
is stopped, press the 7’9 [ENTER] button to
start playback. Press this button again to stop
playback.
8
Searching backward and forward
During playback, press and hold the . or /
button to start searching backward or forward.
Continue pressing and holding the . or /
button to accelerate the search speed.
Release the . or / button to resume
playback.
The display appears as below when playback starts
and during playback.
When
playback starts
During
playback
1 Recorder status
2 Playback file name
3 Remaining battery charge
4 Elapsed playback time
NOTE
• During playback, press and hold the MENU
button to show the remaining time of the
playing file.
• When searching, gg or tt will be shown. If the
search speed is increased, this will change to
ggg or ttt .
• Only files (.wav) in the ROOT directory of the
microSD card can be played back. Files put in a
folder created using a computer, for example,
cannot be played back.
Checking the remaining
recording capacity of the
microSD card
When stopped, press and hold the MENU button
to show the remaining recording capacity of the
microSD card.
Making menu settings
Follow these procedures to change various unit
settings.
1. When the Home Screen is open, press the
MENU button to open the Menu Screen.
2. Use the . and / buttons to select
the menu item to set and press the 7’9
[ENTER] button to show the setting item.
3. Use the . and / buttons to change the
setting.
4. Press the 7’9 [ENTER] button to confirm
the setting and return to the Menu Screen.
5. Repeat steps 2 to 4 as necessary to set each
item.
6. When finished, press the MENU button to
return to the Home Screen.