User Manual

14
TASCAM DR-10SG
Menu structure
Press the MENU button to open the Menu Screen. This list provides an overview of the various menu items.
CAUTION
During recording, pressing the MENU button will only open the following menu items.
01:MIC GAIN , 0 2:E Q , 03:LOW CUT , 04:AUTO LEVEL
Menu item Summary
Settings (default
value underlined)
Explanation
01:MIC GAIN
Mic gain setting
00 – 50 (in incre-
ments of 1 ; default:
25 )
Use to set the mic input sensitivity.
CAUTION
If the menu screen 01:MIC GAIN setting is changed, the 04:AUTO LEVEL item setting will be set to
OFF if it is ON . When this happens, an AUTO LVL Cancel pop-up message will appear.
0 2:E Q
EQ setting
NATURAL ,
STANDARD ,
INTERVIEW ,
FIELD
Set the equalizer.
NATURAL : Close to original sound
STANDARD : Regular setting for a shotgun mic
INTERVIEW : Setting ideal for interviews
FIELD : Setting ideal field recordings
03:LOW CUT
Low cut filter OFF , ON
Turns the mic input low-cut filter on or off.
The cutoff frequency is 120 Hz.
04:AUTO LEVEL
Automatic level
adjustment
OFF , ON
When the input sound level is too low or too high, the recording volume will be increased or decreased
automatically to an appropriate level.
05:LIMITER
Limiter OFF , ON
This function prevents distortion when signals that are too loud are input suddenly. Turns this function on
or off.
Distortion of sounds may occur when signals that are very loud are input even if the LIMITER function is
activated.
In such a case, use the Menu Screen 01:MIC GAIN item to lower the mic input sensitivity, or increase the
distance from the sound source.
06:FS SAMPLE
Sampling
frequency
setting
44.1kHz , 48kHz Set the sampling frequency.
07:BIT LENGTH
Quantization bit
depth setting
16bit , 24 bit Set the quantization bit depth.