User Manual

16
TASCAM DR-10X
Menu structure
Press the MENU button to open the Menu Screen. This list provides an overview of the various menu items.
Menu item Summary
Setting items
(default value
underlined)
Explanation
MIC GAIN
External input/
mic gain settings
EXT/LO/MID/HI
Use to set external input or the mic input sensitivity.
EXT: external input (HOT pin unbalanced input )
LO/MID/HI: Mic input sensitivity (balanced input)
NOTE
If the AUTO LEVEL item on the menu screen is set to ON , it will be reset to OFF when the MIC GAIN setting
is changed. When this happens, AUTO LVL Cancel will appear in a pop-up message.
LOW CUT Low cut filter OFF/ON Turns the mic input low-cut filter on or off. The cutoff frequency is 120 Hz.
LIMITER Input limiter OFF/ON
This function prevents distortion when signals that are too loud are input suddenly. Turns this function on or off.
Distortion of sounds may occur when signals that are very loud are input even if the LIMITER function is activated.
In such a case, use the Menu Screen MIC GAIN item to lower the mic input sensitivity, or increase the distance
from the sound source.
AUTO LEVEL
Automatic level
adjustment
OFF/ON
When the input sound level is too low or too high, the recording volume will be increased or decreased automat-
ically to an appropriate level.
FS SAMPLE
Sampling
frequency
44.1kHz / 48kHz Use to set the sampling frequency setting.
BIT LENGTH
Quantization bit
depth
16bit / 24bit Use to set the quantization bit depth.
FILE TYPE
Recording file
type
MONO / POLY
Use to set the recording file type.
MONO: Record mono files.
POLY: Record stereo files (with the same data on both left and right channels).
NOTE
If the DUAL REC MODE item on the menu screen is set to ON , it will be reset to OFF when the FILE TYPE
setting is changed to P O LY . When this happens, DUAL REC Cancel will appear in a pop-up message.