Operation Manual
Table Of Contents
- 1–Introduction
- 2–Names and Functions of Parts
- 3–Preparation
- 4–Recording
- Selecting file format/sampling frequency, and maximum file size
- Set where to save the file
- Setting the input functions
- Placing the unit and making connections
- Adjusting the input level
- Recording
- Recording playback and input sounds together (overdubbing)
- Recording two files with different levels at the same time (DUAL REC)
- Automatic recording and pausing (AUTO REC)
- Creating new files (track incrementing)
- Mark function
- Recording the moment before pushing RECORD (PRE REC)
- Delaying the start of recording (REC DELAY)
- Dividing a file manually (DIVIDE)
- Recording duration
- 5–Working with Files and Folders (BROWSE screen)
- 6–Playback
- 7–Using the Effects
- 8–Using the Metronome
- 9–Connecting with a Computer
- 10–Settings and Information
- 11–Messages
- 12–Troubleshooting
- 13–Specifications
16 TASCAM DR-2d
2–Names and Functions of Parts
Right side panel
o OUTPUT LEVEL (+, –) keys
Use these keys to adjust the signal level output from the
LINE OUT/ jack. The volume level appears on the
display during adjustment.
p USB port
Use the included USB cable to connect with a computer
USB port.
a LINE OUT/ jack
Use this to connect with headphones or the line input jack
of an amp or other equipment.
s DC IN 5V jack
Connect a TASCAM PS-P520 AC adaptor (purchased
separately) to this jack.
Left side panel
d SD card slot and cover
Insert an SD card into this slot.
f INPUT LEVEL (+, –) keys
Use these keys to adjust the input volume. The volume
level appears on the display during adjustment.
g Strap attachment
Use this to attach a strap.