Operation Manual
Table Of Contents
- 1–Introduction
- 2–Names and Functions of Parts
- 3–Preparation
- 4–Recording
- Selecting file format/sampling frequency, and maximum file size
- Set where to save the file
- Setting the input functions
- Placing the unit and making connections
- Adjusting the input level
- Recording
- Recording playback and input sounds together (overdubbing)
- Recording two files with different levels at the same time (DUAL REC)
- Automatic recording and pausing (AUTO REC)
- Creating new files (track incrementing)
- Mark function
- Recording the moment before pushing RECORD (PRE REC)
- Delaying the start of recording (REC DELAY)
- Dividing a file manually (DIVIDE)
- Recording duration
- 5–Working with Files and Folders (BROWSE screen)
- 6–Playback
- 7–Using the Effects
- 8–Using the Metronome
- 9–Connecting with a Computer
- 10–Settings and Information
- 11–Messages
- 12–Troubleshooting
- 13–Specifications
TASCAM DR-2d 21
The icon appears at the playback position when the
starting point is set.
The icon appears at the playback position when the
ending point is set.
u
Playback file number/total number of files
The total number of files in the playback area and the
number of the current file are shown.
i Effect status
Shows whether the effect function is ON or OFF.
: Effect off
: Effect on
Recording Screen
This screen opens when you press the RECORD key to start
recording standby mode and stays open when you press the
RECORD key again to start recording.
This status of the power and the effect use appears the same as
on the Home Screen. This screen also shows the following.
1 Recording mode status
: Stereo recording
: Monaural recording
2 Prerecording function status
PRE
appears when the prerecording function is ON.
3 Plug-in power status
off
on
4 Low cut filter status
: Low cut filter off
: Low cut filter on (when set to 40Hz, 80Hz,
or 120Hz)
5 Level control function status
: Level control function off
2–Names and Functions of Parts