Operation Manual
Table Of Contents
- 1–Introduction
- 2–Names and Functions of Parts
- 3–Preparation
- 4–Recording
- Selecting file format/sampling frequency, and maximum file size
- Set where to save the file
- Setting the input functions
- Placing the unit and making connections
- Adjusting the input level
- Recording
- Recording playback and input sounds together (overdubbing)
- Recording two files with different levels at the same time (DUAL REC)
- Automatic recording and pausing (AUTO REC)
- Creating new files (track incrementing)
- Mark function
- Recording the moment before pushing RECORD (PRE REC)
- Delaying the start of recording (REC DELAY)
- Dividing a file manually (DIVIDE)
- Recording duration
- 5–Working with Files and Folders (BROWSE screen)
- 6–Playback
- 7–Using the Effects
- 8–Using the Metronome
- 9–Connecting with a Computer
- 10–Settings and Information
- 11–Messages
- 12–Troubleshooting
- 13–Specifications
TASCAM DR-2d 23
2–Names and Functions of Parts
When in recording standby, only the following menu items are
shown.
INPUT SETTING
AUTO REC
MONITOR
EFFECTOR
Using menus
Use the
MENU
screen to make various settings.
1 Press the MENU key to open the
MENU
screen.
2 Use the wheel to select a menu (selected items are
highlighted and appear as light letters on a dark back-
ground), and press the ENTER/MARK key to open a
setting screen.
Example:
REC SETTING
screen
3 Use the wheel to select (highlight) a setting item.
Example: setting the sampling frequency
4 Press the ¯ key (or the ENTER/MARK key) to select
the value of the setting.
Example: setting the sampling frequency
5 Use the wheel to change the setting.
6 To set a different item in the same menu, press the Â
key to select the item you want to set.
7 Repeat step 3 to 6 as necessary to set each item.