Operation Manual
Table Of Contents
- 1–Introduction
- 2–Names and Functions of Parts
- 3–Preparation
- 4–Recording
- Selecting file format/sampling frequency, and maximum file size
- Set where to save the file
- Setting the input functions
- Placing the unit and making connections
- Adjusting the input level
- Recording
- Recording playback and input sounds together (overdubbing)
- Recording two files with different levels at the same time (DUAL REC)
- Automatic recording and pausing (AUTO REC)
- Creating new files (track incrementing)
- Mark function
- Recording the moment before pushing RECORD (PRE REC)
- Delaying the start of recording (REC DELAY)
- Dividing a file manually (DIVIDE)
- Recording duration
- 5–Working with Files and Folders (BROWSE screen)
- 6–Playback
- 7–Using the Effects
- 8–Using the Metronome
- 9–Connecting with a Computer
- 10–Settings and Information
- 11–Messages
- 12–Troubleshooting
- 13–Specifications
24 TASCAM DR-2d
8 To open the
MENU
screen, press the MENU key.
To return to the Home Screen, press the HOME key.
Basic operation
Use the following keys to operate the various screens.
MENU key:
Opens the
MENU
screen.
PB CONT key:
Opens the
PB CONTROL
screen.
/HOME [ª] key:
When any other screen is open, press this to return to the
Home Screen. Use this to answer “
NO
” to a confirmation
message.
ENTER/MARK key:
Use this to confirm the selection of a setting item or to
answer “
YES
” to a confirmation message.
¯ key:
Use this to move the cursor (the highlighted area) to the
right on the screen, and to open folders on the
BROWSE
screen.
 key:
Use this to move the cursor (the highlighted area) to the left
on the screen, and to close folders on the
BROWSE
screen.
Wheel:
Use this to select items and to change values.
2–Names and Functions of Parts