Operation Manual
Table Of Contents
- 1–Introduction
- 2–Names and Functions of Parts
- 3–Preparation
- 4–Recording
- Selecting file format/sampling frequency, and maximum file size
- Set where to save the file
- Setting the input functions
- Placing the unit and making connections
- Adjusting the input level
- Recording
- Recording playback and input sounds together (overdubbing)
- Recording two files with different levels at the same time (DUAL REC)
- Automatic recording and pausing (AUTO REC)
- Creating new files (track incrementing)
- Mark function
- Recording the moment before pushing RECORD (PRE REC)
- Delaying the start of recording (REC DELAY)
- Dividing a file manually (DIVIDE)
- Recording duration
- 5–Working with Files and Folders (BROWSE screen)
- 6–Playback
- 7–Using the Effects
- 8–Using the Metronome
- 9–Connecting with a Computer
- 10–Settings and Information
- 11–Messages
- 12–Troubleshooting
- 13–Specifications
30 TASCAM DR-2d
Preparing an SD card for use
In order to use an SD card in this unit, you must format it rst.
1 Confirm that an SD card is installed and turn the power
ON.
2 The following message appears when a new card or a
card formatted for use with another device is installed in
the unit.
3 Press the ENTER/MARK key to start formatting.
4 When formatting ends, the Home Screen opens.
You can also reformat the card in this unit at any time. (See
“System Settings and Formatting” on page 75.)
CAUTION
Please use a PS-P520 AC adapter (sold separately) or make
•
certain that there is sufficient remaining battery power
when formatting a card.
Formatting a card erases all the data on it.
•
Card write protection
SD cards have protect switches that prevent writing new data to
them.
Unprotected Protected
If you slide the protect switch to the “LOCK” position, le
recording and editing is not possible. Move the switch to the
unlocked position in order to record, erase and otherwise edit
data on the card.
3–Preparation