Operation Manual
Table Of Contents
- 1–Introduction
- 2–Names and Functions of Parts
- 3–Preparation
- 4–Recording
- Selecting file format/sampling frequency, and maximum file size
- Set where to save the file
- Setting the input functions
- Placing the unit and making connections
- Adjusting the input level
- Recording
- Recording playback and input sounds together (overdubbing)
- Recording two files with different levels at the same time (DUAL REC)
- Automatic recording and pausing (AUTO REC)
- Creating new files (track incrementing)
- Mark function
- Recording the moment before pushing RECORD (PRE REC)
- Delaying the start of recording (REC DELAY)
- Dividing a file manually (DIVIDE)
- Recording duration
- 5–Working with Files and Folders (BROWSE screen)
- 6–Playback
- 7–Using the Effects
- 8–Using the Metronome
- 9–Connecting with a Computer
- 10–Settings and Information
- 11–Messages
- 12–Troubleshooting
- 13–Specifications
TASCAM DR-2d 31
Setting the date and time
Using its internal clock, this unit remembers the date and time
when a le is recorded.
1 Press the MENU key to open the
MENU
screen.
2 Use the wheel to select
DATE/TIME
, and press the
ENTER/MARK key.
DATE/TIME
screen appears.
3 Use the Â/¯ keys to move the cursor, and use the
wheel to change values.
4 Press the ENTER/MARK key to confirm the change and
return to the
MENU
screen.
NOTE
You can set the unit to automatically add the date and time
to file names. (See “Setting the format of file names” on page
77.)
CAUTION
The date and time setting can only be maintained for a few
minutes when the unit is not powered by batteries or an
AC adaptor. When using batteries, we recommend that you
replace or recharge them before they completely lose power.
3–Preparation