Operation Manual
Table Of Contents
- 1–Introduction
- 2–Names and Functions of Parts
- 3–Preparation
- 4–Recording
- Selecting file format/sampling frequency, and maximum file size
- Set where to save the file
- Setting the input functions
- Placing the unit and making connections
- Adjusting the input level
- Recording
- Recording playback and input sounds together (overdubbing)
- Recording two files with different levels at the same time (DUAL REC)
- Automatic recording and pausing (AUTO REC)
- Creating new files (track incrementing)
- Mark function
- Recording the moment before pushing RECORD (PRE REC)
- Delaying the start of recording (REC DELAY)
- Dividing a file manually (DIVIDE)
- Recording duration
- 5–Working with Files and Folders (BROWSE screen)
- 6–Playback
- 7–Using the Effects
- 8–Using the Metronome
- 9–Connecting with a Computer
- 10–Settings and Information
- 11–Messages
- 12–Troubleshooting
- 13–Specifications
TASCAM DR-2d 49
4–Recording
4 Use the wheel to select
ON
.
5 Press the
/HOME [ª] key to return to the Home
Screen.
TIP
By using this in combination with the AUTO REC function, you
can record events without losing the beginnings of sounds.
NOTE
If the amount of time in record standby is less than two
•
seconds, the sound for that amount of time is recorded.
You cannot use the PRE REC function with overdub
•
recording. When overdubbing please set the PRE REC item
OFF.
Delaying the start of recording (REC
DELAY)
This function allows you to delay the start of recording by 0.3
seconds (xed interval) after the RECORD (º) key is pressed.
This is useful when you want to avoid recording the sound of
pressing the RECORD (º) key.
1 Press the MENU key to open the
MENU
screen.
2 Use the wheel to select
REC
SETTING
, and press the
ENTER/MARK key.
REC
SETTING
screen appears.
3 Use the wheel to select
DELAY
and press the ¯ key or
ENTER/MARK key.
4 Use the wheel to select
ON
.
5 Press the
/HOME [ª] key to return to the Home
Screen.
NOTE
Set PRE REC to OFF when you set REC DELAY to ON.