Operation Manual
Table Of Contents
- 1–Introduction
- 2–Names and Functions of Parts
- 3–Preparation
- 4–Recording
- Selecting file format/sampling frequency, and maximum file size
- Set where to save the file
- Setting the input functions
- Placing the unit and making connections
- Adjusting the input level
- Recording
- Recording playback and input sounds together (overdubbing)
- Recording two files with different levels at the same time (DUAL REC)
- Automatic recording and pausing (AUTO REC)
- Creating new files (track incrementing)
- Mark function
- Recording the moment before pushing RECORD (PRE REC)
- Delaying the start of recording (REC DELAY)
- Dividing a file manually (DIVIDE)
- Recording duration
- 5–Working with Files and Folders (BROWSE screen)
- 6–Playback
- 7–Using the Effects
- 8–Using the Metronome
- 9–Connecting with a Computer
- 10–Settings and Information
- 11–Messages
- 12–Troubleshooting
- 13–Specifications
54 TASCAM DR-2d
CANCEL
No operation is conducted and the selected le is left as is.
Folder operations
Select the desired folder on the Browse Screen and press the
ENTER/MARK key to open the pop-up window that is shown
below.
Use the wheel to select the item you want from the following
list and press ENTER/MARK to execute it.
SELECT
Returns to the Home Screen and selects the rst le in the
folder. This folder becomes the new playback area regardless
of the previous playback area setting. When recording, les are
created in this folder.
CREATE
A pop-up appears to conrm that you want to create a new
folder.
Press the ENTER/MARK key to create a new folder, or press
the /HOME [ª] key to cancel the operation.
However, if you try to create a new folder inside a second level
subfolder the message, “
Layer
too
deep
” appears and the
folder is not made.
ALL DELETE
A pop-up message appears to conrm that you want to delete all
the les in the selected folder at once.
Press the ENTER/MARK key to erase the les or press the
/HOME [ª] key to cancel.
5–Working with Files and Folders