Operation Manual
Table Of Contents
- 1–Introduction
- 2–Names and Functions of Parts
- 3–Preparation
- 4–Recording
- Selecting file format/sampling frequency, and maximum file size
- Set where to save the file
- Setting the input functions
- Placing the unit and making connections
- Adjusting the input level
- Recording
- Recording playback and input sounds together (overdubbing)
- Recording two files with different levels at the same time (DUAL REC)
- Automatic recording and pausing (AUTO REC)
- Creating new files (track incrementing)
- Mark function
- Recording the moment before pushing RECORD (PRE REC)
- Delaying the start of recording (REC DELAY)
- Dividing a file manually (DIVIDE)
- Recording duration
- 5–Working with Files and Folders (BROWSE screen)
- 6–Playback
- 7–Using the Effects
- 8–Using the Metronome
- 9–Connecting with a Computer
- 10–Settings and Information
- 11–Messages
- 12–Troubleshooting
- 13–Specifications
56 TASCAM DR-2d
On the Home Screen, you can use the  and ¯ keys
to select the playback track. The les that you can select are
determined by the playback area setting.
Limiting the playback area makes track selection easier when
you have numerous recorded and copied tracks on the SD card.
On the Play Mode Screen, you can select all les, the current
folder or the playlist as the playback area. You can also use the
Browse Screen to set a folder as the playback area.
TIP
On the Browse Screen, regardless of the playback area setting,
you can select any file on the card that you want.
Adjusting playback volume
The volume output from the built-in speaker or the connector
can be adjusted by using the OUTPUT LEVEL (+, –) keys.
The output volume level pop-up appears.
Setting the playback area (AREA)
Set the playback area for repeat and ordinary playback on the
PLAY
MODE
screen.
1 Press the MENU key to open the Menu Screen.
2 Use the wheel to select
PLAY
MODE
and press the ENTER/
MARK key.
PLAY
MODE
screen appears.
3 Use the wheel to select
AREA
and press the ¯ key or
ENTER/MARK key.
6–Playback