Operation Manual
Table Of Contents
- 1–Introduction
- 2–Names and Functions of Parts
- 3–Preparation
- 4–Recording
- Selecting file format/sampling frequency, and maximum file size
- Set where to save the file
- Setting the input functions
- Placing the unit and making connections
- Adjusting the input level
- Recording
- Recording playback and input sounds together (overdubbing)
- Recording two files with different levels at the same time (DUAL REC)
- Automatic recording and pausing (AUTO REC)
- Creating new files (track incrementing)
- Mark function
- Recording the moment before pushing RECORD (PRE REC)
- Delaying the start of recording (REC DELAY)
- Dividing a file manually (DIVIDE)
- Recording duration
- 5–Working with Files and Folders (BROWSE screen)
- 6–Playback
- 7–Using the Effects
- 8–Using the Metronome
- 9–Connecting with a Computer
- 10–Settings and Information
- 11–Messages
- 12–Troubleshooting
- 13–Specifications
TASCAM DR-2d 63
6–Playback
4 Set the REPEAT item to one of the following selections.
OFF
(default):
All tracks in the playback area are played in sequence one
time. (This setting is the ordinary playback mode.)
SINGLE
:
The selected track is played once without repeating. The
icon appears on the Home Screen.
1
REPEAT
:
The current track is played repeatedly. The icon
appears on the Home Screen.
ALL
REPEAT
:
All tracks in the selected playback area are played back
repeatedly. The icon appears on the Home Screen.
NOTE
If you start loop playback, the REPEAT item automatically
switches to OFF if it is in a different mode.
5 Press the
/HOME [ª] key to return to the Home
Screen.
Loop playback
With this function, you can continuously repeat (loop) the
playback of a selection that you make.
1 Press the I/O key during playback to set the point when
you want to start loop playback. The current position is
set as the IN point.
2 Press the I/O key at the point when you want loop
playback to stop. The current position is set as the OUT
point, and loop playback begins between the IN and OUT
points.
The current positions of the IN and OUT points are shown
by the and icons that appear below the playback
position display bar in the lower part of the Home Screen.
During loop playback the indicator also appears.
To stop loop playback, press the
•
I/O key.
If you set one of the repeat mode, loop playback is canceled.
•