Operation Manual
Table Of Contents
- 1–Introduction
- 2–Names and Functions of Parts
- 3–Preparation
- 4–Recording
- Selecting file format/sampling frequency, and maximum file size
- Set where to save the file
- Setting the input functions
- Placing the unit and making connections
- Adjusting the input level
- Recording
- Recording playback and input sounds together (overdubbing)
- Recording two files with different levels at the same time (DUAL REC)
- Automatic recording and pausing (AUTO REC)
- Creating new files (track incrementing)
- Mark function
- Recording the moment before pushing RECORD (PRE REC)
- Delaying the start of recording (REC DELAY)
- Dividing a file manually (DIVIDE)
- Recording duration
- 5–Working with Files and Folders (BROWSE screen)
- 6–Playback
- 7–Using the Effects
- 8–Using the Metronome
- 9–Connecting with a Computer
- 10–Settings and Information
- 11–Messages
- 12–Troubleshooting
- 13–Specifications
![](/manual/tascam/dr-2d/operation-manual-english/images/img-69.png)
TASCAM DR-2d 69
part of the icon. The level can be set to values between 0 and
100.
TIME knob:
This adjusts the character of the selected preset. Select the
TIME
knob icon and press the ENTER/MARK key to select the
numerical value in the upper part of the icon. Use the wheel to
set the value.
SOURCE:
Use this to set whether the effect is applied to the input signal
(
INPUT
) or the playback signal (
PLAY
). Select the
SOURCE
icon, press the ENTER/MARK key, and use the wheel to select
the effect source. The default setting is
PLAY
.
6 Press the
/HOME [ª] key to return to the Home
Screen.
Effects Preset List
Preset
name
Effects
RevHall 1 This is a bright reverb modeled after a large hall-
like space.
RevHall 2 This is a warm reverb modeled after a large hall-
like space.
RevRoom This reverb is modeled on a small indoor space.
RevStudio This reverb is modeled on a studio-like space
RevPlate 1 This is a bright plate reverb.
RevPlate 2 This is a warm plate reverb.
7–Using the Effects