Operation Manual
Table Of Contents
- 1–Introduction
- 2–Names and Functions of Parts
- 3–Preparation
- 4–Recording
- Selecting file format/sampling frequency, and maximum file size
- Set where to save the file
- Setting the input functions
- Placing the unit and making connections
- Adjusting the input level
- Recording
- Recording playback and input sounds together (overdubbing)
- Recording two files with different levels at the same time (DUAL REC)
- Automatic recording and pausing (AUTO REC)
- Creating new files (track incrementing)
- Mark function
- Recording the moment before pushing RECORD (PRE REC)
- Delaying the start of recording (REC DELAY)
- Dividing a file manually (DIVIDE)
- Recording duration
- 5–Working with Files and Folders (BROWSE screen)
- 6–Playback
- 7–Using the Effects
- 8–Using the Metronome
- 9–Connecting with a Computer
- 10–Settings and Information
- 11–Messages
- 12–Troubleshooting
- 13–Specifications
![](/manual/tascam/dr-2d/operation-manual-english/images/img-78.png)
78 TASCAM DR-2d
File name format
The
TYPE
item can be set to either
WORD
(default setting) or
DATE
.
WORD: When set to
WORD
, a 6-character le name is used as
the beginning of each le name.
Example: DR0000_0000.wav
DATE: The date is used as the le name (in yymmdd format).
Example: 090101_0000.wav
NOTE
The date is set using the unit’s internal clock. (See “Setting the
date and time” on page 31.)
Setting the WORD item
To set the WORD item, use the  and ¯ keys to move the
cursor, and use the wheel to select the character.
In addition to the alphabet and numbers, the following
characters can be used:
! # $ % & ' ( ) + , - . ; = @ [ ] ^ _ ` { } ~
10–Settings and Information