User Manual

30 TASCAM DR-40
VSA shown on the left to indicate that the VSA (variable
speed audition: enables the tempo to be changed without
changing the pitch) function is enabled.
3 Available buttons
The buttons available in the Playback Control screen are as
follows.
ENTER : Creates or deletes an IN or OUT point.
MENU : Switch over between ON and OFF status of the loop
playback function.
NOTE
Unlike the other screens, the
•
QUICK button in this screen
works to display the quick menu containing only the LEVEL
ALIGN function, and no other functions will be available.
Recording is not possible on this screen.
•
On this screen, the
•
. and / buttons can be used to
skip to loop IN (starting) and OUT (ending) points and the
beginnings and ends of les, but not to the previous or next
tracks.
4 Loop playback IN (starting) and OUT (ending) points
The set starting and ending points of the loop are shown.
The icon appears at the playback position on the bar
when the starting point is set.
The icon appears at the playback position on the bar
when the ending point is set.
5 Playback position display
The current playback position is shown by a bar. As
playback progresses, the bar extends to the right.
Menu item list
This list provides an overview of the various menu items.
Menu item Function Pages
REC SETTING Recording mode settings 45
PLAY
SETTING
Play area select, repeat setting, playback
equalizer, jump-back settings
74,
80,
83
BROWSE
SD card le and folder operations 69
SPEAKER
ON/OFF status of built-in speaker 40
OTHERS
OTHERS submenu display 31
2 – Names and Functions of Parts