User Manual

60 TASCAM DR-40
4 – Recording
listen to and select the best one from multiple recordings
afterward.
7 Press the . button to return to setting item
selection.
8 Use the + and – buttons to select SOURCE , and press the
ENTER/MARK or / button.
9 Use the + and – buttons to set the input source.
SOURCE Explanation
INT MIC
(default value)
Record using built-in mics.
EXT IN 1 Record using external inputs.
When creating a stereo le, the same sound is
added to both L/R channels.
EXT IN 1/2 Record using external inputs.
When creating a mono recording, the L
channel is recorded.
10 Press the . button to return to setting item
selection.
11 When setting is complete, press the (HOME) [8]
button to return to the Home Screen.
Select the file you want to overdub
Use the . and / buttons and the BROWSE screen to
select that files that you want to overdub.
NOTE
See "Working with Files and Folders (BROWSE Screen)" on
page 69 for selecting les using the BROWSE screen.
Start the overdubbing
1 Press the RECORD [0] button to set the unit to record
standby.
MIX recording Separate recording
When in MIX mode, press the 1/2 [SOLO] button to mute
monitoring of the input sound.
When in SEPARATE mode, if there are two playback files,
press the 3/4 [SOLO] button to switch between the input
sound and the playback file. If there is only one file, this
mutes the input sound.
2 Press the RECORD [0] button to start overdubbing.
MIX recording Separate recording