Reference Guide

14
TASCAM DR-40X
2 – Names and Functions of Parts
CAUTION
i
When recording or in recording standby, only the following screens and items are shown.
LOW CUT and AUTO REC setting MODE and LEVEL items on the REC SETTING screen (AUTO REC settings are shown, but cannot be
changed)
EFFECT screen REVERB, PRESET, LEVEL and SOURCE items
i
When the Playback Control screen is open, pressing the MENU button will not open the MENU screen. This turns the loop
playback function on/off. (See "Loop playback of a selection" on page 48)
Using the menu
We will explain this by showing how to set the playback area as an example.
1.
Press the MENU button to open the MENU screen.
2.
Use the + or – button to select a menu item (highlighted),
and use the ENTER/MARK or / button to move to
various settings screens.
Example: PLAY SETTING screen
3.
Use the + or – button to select (highlight) a menu item
to set.
Example: AREA is selected.
4.
Use the ENTER/MARK or / button to move the
cursor to highlight the value of the setting.
5.
Use the + or – button to change the setting.
6.
Press the . button to set a different item in the same
menu.
This enables selection of a different item. Use the + or −
button to select another item to set.
7.
Repeat step 3 to 6 as necessary to set other items.
8.
Press the MENU button to return to the MENU screen. To
return to the Home screen, press the ¤ (HOME) [8]
button.