Reference Guide

30
TASCAM DR-40X
4 – Recording
Simultaneously recording two files at
different input levels (DUAL REC)
This unit can simultaneously make two recordings at different
input levels (dual recording). For example, when recording
with mics, you can record the main recording with the
input level set as high as possible while recording a backup
recording with the input level set slightly lower to prevent
the sound from distorting and record both at the same time.
The main and backup recordings will each be saved as a
separate file.
The input level setting will apply to the main recording (see
"Preparing the recording inputs" on page 24 and "Adjusting
the input level" on page 25).
Since the input level of the backup recording is set relative
to the input level of the main recording, set the input level of
the main recording first. Then, set the DUAL LVL item for the
backup recording.
NOTE
Dual recording and overdubbing cannot be used simul-
taneously. In this mode, you cannot record the sound
with the effect applied, but you can use the effect for
monitoring.
Enabling dual recording
1.
Press the REC MODE button to open the REC MODE
screen.
2.
Use the + or − button to select (highlight) REC MODE, and
press the ENTER/MARK or / button.
3.
Use the + and – buttons to set it to DUAL.
4.
Press the . button to return to setting item selection.
5.
Use the + and – buttons to select (highlight) SOURCE, and
press the ENTER/MARK or / button.
6.
Use the + and – buttons to set the input source.
SOURCE
(options)
Explanation
INT STEREO
(default)
Stereo recording with built-in mics
INT MONO
L/R signals of built-in mics are mixed
and recorded in mono
EXT IN 1/2
Stereo recording with external mics or
equipment
EXT INDEP.
Use two external input channels with
independent level setting
EXT IN 1
Mono recording with external mics or
equipment
7.
Press the . button to enable selection of settings.
8.
Use the + and – buttons to select DUAL LVL, and press
the ENTER/MARK or / button.
9.
Use the + and − buttons to set the dual level for the
backup recording.
Setting range: -6dB (default value) to -12dB
10.
Press the . button to enable selection of settings.
11.
Use the + or − button to select (highlight) LEVEL MODE,
and press the ENTER/MARK or / button.
12.
Use the + or – button to set the backup recording LEVEL
MODE function.
LEVEL MODE
(options)
Meaning
OFF (default)
Dual level setting will be used.
LIMITER
This function prevents distortion
when signals that are too loud are
input suddenly. This is also suited
for recording live performances with
large volume changes.
PEAK
REDUCTION
If the input sound is too loud, the
input level is automatically lowered
to a suitable level. This function
makes handling difficult input level
settings easier.
AUTO LEVEL
Low input levels are raised and high
input levels are lowered automati-
cally, making this useful for recording
meetings, for example.
13.
Press the . button to enable selection of settings.