Reference Guide

TASCAM DR-40X
39
4 – Recording
Self-timer function
Similar to a camera, the DR-40X has a self-timer function to
begin recording after a set period of time.
1.
Press RECORD [0] button when stopped or playing
to put the unit in recording standby, and press the PB
CONT button.
2.
The self-timer icon appears in the recorder status
screen, and time is shown on the right.
Each time you press the PB CONT button, the setting
changes as follows:
Time shown to right of icon
OFF (default) w 5S (5 seconds) w 10S (10 seconds) w
OFF
3.
Set the time period, and press the RECORD [0] or PLAY
[7] button.
Recording will start after the set time period.
NOTE
i
This function cannot be used when recording is paused in
the middle of recording.
i
Self-timer function is not possible when using the AUTO
REC function.
i
During overwrite recording, the self-timer cannot be used.
Solo function
Press and hold the 1/2 [SOLO] or 3/4 [SOLO] button to
enable the solo function.
Use this in 4-channel mode and other cases when multiple
inputs are being recorded to monitor only one of the inputs.
You can check the solo status with the input source icons.