Reference Guide

42
TASCAM DR-40X
5 – Working with Files and Folders (BROWSE screen)
ADD PLAYLIST
Add the selected file to the playlist. (See "Using the playlist"
on page 46)
FILE SWAP
Files recorded during the following recording modes can be
swapped.
4CH mode:
A file recorded by the built-in mics (channels 1/2) can
be swapped with a file recorded by external mics or
equipment (channels 3/4).
Examples
180113_0002S12.WAV
x
180113_0002S34.WAV
180113_0002S34.WAV
x
180113_0002S12.WAV
OVERDUB SEPARATE mode:
1 The playback file and a newly recorded file can be
swapped.
Examples
180113_0004S12.WAV
x
180113_0004S34.WAV
180113_0004S34.WAV
x
180113_0004S12.WAV
The above is the same as swapping File-A and File-B as
described on 34 page .
2 The newly recorded file and the virtual file saved
based on it can be swapped.
Examples
180113_0004S34.WAV
x
180113_0004V34t1.WAV
180113_0004V34t1.WAV
x
180113_0004S34.WAV
The above is the same as swapping File-B and File-C
as described on page 34. In addition, since you
can choose the virtual file freely when swapping the
above, you can also swap File-B and File-D as on page
34.
However, you cannot swap two virtual files (for
example, File-C and File-D as on page 34).
FILE DELETE
A message appears to confirm that you want to delete the
file.
Press the ENTER/MARK button to delete the file and the ¤
(HOME) [8] button to cancel deletion.
PROJECT DELETE
A pop-up message appears confirming that you want to
erase the project containing the selected file.
Press the ENTER/MARK button for each project to erase.
Press the ¤ (HOME) [8] button to cancel deletion.
CAUTION
This deletes all the files in the selected project.