Reference Guide

TASCAM DR-40X
51
6 – Playback
4.
Use the + or − button to select ON, and press the ENTER/
MARK button to enable the level alignment function.
To disable the level alignment function, select (highlight)
OFF and press the ENTER/MARK button.
NOTE
The level alignment function might not have much effect
depending on the source of the sound (for example, a
music file that has already had sound pressure adjusted).
Using the jump function
During playback or when paused, you can jump backward or
forward from the current playback position by a set amount
of time.
The same playback status will be retained after jumping.
The jump forward function can only be used during dictation
playback mode, overwrite recording mode and with the file
division function. Operation differs in these modes.
Use the JUMP BACK and JUMP FWD settings to set the
backward and forward times.
JUMP BACK
Options: OFF, 1sec, 3sec (default), 5sec, 10sec, 30sec,
1min, 5min, 10min
JUMP FWD
Options: OFF, 1sec, 3sec, 5sec, 10sec (default), 30sec,
1min, 5min, 10min
Operation when not using dictation playback
mode, overwrite recording mode or the file
division function
Jumping back
During playback or when paused, press the 7 button
to jump back from the current position by the set JUMP
BACK time.
Operation when using dictation playback mode,
overwrite recording mode or the file division
function
Jumping back
During playback or when paused, press the 7 button
to jump back from the current position by the set JUMP
BACK time.
Jumping forward
During playback or when paused, press the / button
to jump forward from the current position by the set
JUMP FWD time.
NOTE
When jumping back, if the amount of time from the
current playback position to the beginning of the file is
less than the set “JUMP BACK” time, playback will jump to
the beginning of the file. When jumping forward, if the
amount of time from the current playback position to
the end of the file is less than the set “JUMP FWD” time,
playback will jump to the end of the file and pause.
Setting the jump back time
Operation from the MENU screen
1.
Press the MENU button to open the MENU screen.
2.
Use the + or − button to select PLAY SETTING, and press
the ENTER/MARK or / button.
This opens the PLAY SETTING screen.
3.
Use the + and − buttons to select (highlight) JUMP BACK
and press the ENTER/MARK or / button.
4.
Use the + and – buttons to set the jump back time.
5.
After completing the setting, press the ¤ (HOME) [8]
button to return to the Home Screen.
NOTE
If the amount of time to the beginning of the file is less
than the set time, playback will jump to the beginning of
the file and continue playing or pause.
Operation from the Quick menu
1.
Switch the operation mode of the unit to dictation
playback mode.
2.
When stopped in dictation playback mode, press the
QUICK button to open the Quick menu.
3.
Use the + or − button to select (highlight) JUMP BACK
and press the ENTER/MARK button.
The JUMP BACK time setting screen will open.
4.
Use the + or − button to select (highlight) a function,
and press the ENTER/MARK button to enable it and
return to the Home Screen.