Reference Guide

52
TASCAM DR-40X
6 – Playback
Setting the jump forward time
Operation from the MENU screen
1.
Press the MENU button to open the MENU screen.
2.
Use the + or − button to select PLAY SETTING, and press
the ENTER/MARK or / button.
This opens the PLAY SETTING screen.
3.
Use the + or − button to select (highlight) JUMP FWD and
press the ENTER/MARK or / button.
4.
Use the + and - buttons to set the jump forward time.
5.
After completing the setting, press the ¤ (HOME) [8]
button to return to the Home Screen.
NOTE
If the amount of time to the end of the file is less than
the set time, playback will jump to the end of the file and
pause.
Operation from the Quick menu
1.
When stopped in dictation playback mode, press the
QUICK button to open the Quick menu.
2.
Use the + or − button to select (highlight) JUMP FWD and
press the ENTER/MARK button.
The JUMP FWD time setting screen will open.
3.
Use the + or − button to select (highlight) a function,
and press the ENTER/MARK button to enable it and
return to the Home Screen.
Playback of files recorded using dual
recording
When dual recording has been used, press and hold the 1/2
[SOLO] button to select the main recording file or press and
hold the 3/4 [SOLO] button to select the backup recording
file.
The file will be played for the input source that has an icon
with a dark background.
NOTE
This function, which uses the 1/2 [SOLO] and 3/4 [SOLO]
buttons to switch between files, finds files by the first 11
characters of their names. If file names are changed, this
function will not work.
OVERDUB INPUT MUTE function
(during playback)
SEPARATE MODE
Press the 3/4 [SOLO] button to switch between the input
sound and the 3/4 channel playback sound.
After overdubbing, you can use this to listen to the recorded
file.
MIX MODE
Press the 1/2 [SOLO] button to mute the input sound.
Solo function
Press and hold the 1/2 [SOLO] button or 3/4 [SOLO] button
to enable the solo function.
Use for projects that have been recorded in 4-channel mode
and in other cases when multiple files are being played back
to monitor only one of the files.
You can check the solo status with the track status indica-
tions.